THE ACCURATERELOADING.COM FAVORITE LOADS FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
458 Win Mag
 Login/Join
 
one of us
Picture of Wendell Reich
posted
I did a search here, but came up with very few posts on this forum, so, let's try again.

What is your favorite 458 Win Mag load?
 
Posts: 6326 | Location: Dallas, TX | Registered: 13 July 2001Reply With Quote
one of us
Picture of Wendell Reich
posted Hide Post
Looking for info on what most consider to be the best powders. I know YMMV, but there is usually a general consensus on what powders top the list.
 
Posts: 6326 | Location: Dallas, TX | Registered: 13 July 2001Reply With Quote
one of us
posted Hide Post
I had my first 458 built back in 1974, at the ripe old age of 17. It was a Federal Arms barreled action, $119.00 if I remember correctly, the gunsmith that worked at the shop I worked at, donated an old Interarms(?) stock, and did the sights, old Remington 700, the bedding and the cross bolts. I searched for different loads and using my trusty Lyman 45th edition, settled on 3031. I have used it ever since and had good results. I always shot 500 gr. jacketed bullets, usually Hornady, Remington or Winchester. CCI large rifle magnum primers. Played around with a few other powders, but they did not improve, at least for me, on the use of 3031. This has been the case in the several 458's I have owned. Don't shoot them a lot anymore due to shoulder injury. I don't remember the exact load, but think it was in the neighborhood of 69 to 72 grains. It was a compressed load, but never gave me any problems.
 
Posts: 1699 | Location: Colorado, USA | Registered: 11 November 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia