THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Any thought on a peep sight for big bores?
Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Any thought on a peep sight for big bores? Login/Join
 
One of Us
posted
Something like a Lyman 57 or similar vintage Redfield?
 
Posts: 528 | Location: Baltimore, MD | Registered: 21 July 2008Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
works out great, and if you have experienced eyes, drill them out a bit


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
I have a rear peep sight and a red fiber optic front sight on my Dakoata Safari in 458 Lott. I am 72 years old and I LOVE only having to focus my eyes on just the front sight. I can shoot it pretty well too for my use on Buffalo in Africa.

I had iron sights on my 404 Jeffery and used it to take some Buffalo with Andrew in Zambia, but I have recently mounted a Leupold fixed 2.5 scope on it now, and I shoot much better with it.

My 458 Lott kicks a bit more (!) than my 404, so I still don’t want a scope on it…yet! The peep is doing just fine for my use on close shots on Buff.
 
Posts: 2642 | Location: Colorado | Registered: 26 May 2010Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
Posting for D'Arcy Echols:





 
Posts: 7828 | Registered: 31 January 2005Reply With Quote
One of Us
Picture of Michael Robinson
posted Hide Post
Fantastic. Functional and aesthetically pleasing. Love it.


Mike

Wilderness is my cathedral, and hunting is my prayer.
 
Posts: 13757 | Location: New England | Registered: 06 June 2003Reply With Quote
One of Us
posted Hide Post
I have gone to Skinner peep sights on two of my big bores in my ripe old age of 77. I like a big aperture. Aperture sights are very accurate/fast and make a rifle nice to carry.

Also, that Leopold FX 2.5 is an awesome scope for big bores with its very long eye relief.

Good choices.


IHMSA BC Provincial Champion and Perfect 40 Score, Unlimited Category, AAA Class.
 
Posts: 3419 | Location: Kamloops, BC | Registered: 09 November 2015Reply With Quote
One of Us
Picture of Rick R
posted Hide Post
My Whitworth .375 came with a Redfield receiver sight. I replaced the tiny front bead with an XS front post with the white line up the front.

I used it to take a nice 10 point at 60+ yards a few years ago and while no where near as elegant as those Echols rifles, I wouldn’t hesitate to use it anywhere for any critter.
 
Posts: 1912 | Location: Charleston, WV, USA | Registered: 10 January 2003Reply With Quote
One of Us
posted Hide Post
To echo Michael’s comment, those are indeed good looking peep sights. Wood stocked rifle isn’t bad either!!!
 
Posts: 2642 | Location: Colorado | Registered: 26 May 2010Reply With Quote
One of Us
posted Hide Post
I have a cz 550 in 375 H&H , I put a New England Custom Gun peep sight on it. I'm very pleased with the quality and function.


---------------------------------

We unfortunately will vote our way into socialism.
The end result will be having to shoot our way out of it.
 
Posts: 388 | Location: Aroostook County, Maine | Registered: 09 September 2010Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Gojoe:
I have a cz 550 in 375 H&H , I put a New England Custom Gun peep sight on it. I'm very pleased with the quality and function.


That is exactly what I have on my 458 Lott, and am just as pleased, so far.
 
Posts: 2642 | Location: Colorado | Registered: 26 May 2010Reply With Quote
one of us
Picture of 458Win
posted Hide Post
Quite a few of the original Gibbs 505 rifles came with factory peep sights


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
one of us
posted Hide Post
Jim Brockman in Gooding Idaho makes a peep sight that pops up when you take the scope off, based on a talley base..

I like the Leupold 3X best of all, or the Leupold Alaskan2.5X, both excellent on big bores or small bores..depending on use..Ive used the 3x on elk deer, and Hippo and buffalo..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of buckeyeshooter
posted Hide Post
I have a Williams foolproof on my 50 alaskan lever action. Very quick target pick up with the peep.
 
Posts: 5725 | Location: Ohio | Registered: 02 April 2003Reply With Quote
One of Us
Picture of Nick Adams
posted Hide Post
quote:
Originally posted by BaxterB:
Posting for D'Arcy Echols:





Interesting, but do you have a picture of the front sight? I’m just curious as to how high it is in relation to that rear aperture sight perched above the receiver. Thanks!
 
Posts: 376 | Location: Midwest, USA | Registered: 01 March 2007Reply With Quote
One of Us
Picture of Nick Adams
posted Hide Post
quote:
Originally posted by Brian Canada:
I have gone to Skinner peep sights on two of my big bores in my ripe old age of 77. I like a big aperture. Aperture sights are very accurate/fast and make a rifle nice to carry.
Also, that Leopold FX 2.5 is an awesome scope for big bores with its very long eye relief.

That’s my plan as well. I’m going to mount Skinner’s CZ 550 aperture unit on my AHR .404 Jeff.
 
Posts: 376 | Location: Midwest, USA | Registered: 01 March 2007Reply With Quote
One of Us
Picture of TREE 'EM
posted Hide Post
quote:
Originally posted by Atkinson:
Jim Brockman in Gooding Idaho makes a peep sight that pops up when you take the scope off, based on a talley base..

I like the Leupold 3X best of all, or the Leupold Alaskan2.5X, both excellent on big bores or small bores..depending on use..Ive used the 3x on elk deer, and Hippo and buffalo..


I thought the Brockman pop up peep was a fantastic idea when I first heard about it in 1998. I contacted Jim and ordered one for my Pre 64 model 70 30/06 immediately. I’ve been anxiously awaiting its arrival ever since.


All We Know Is All We Are
 
Posts: 1222 | Location: E Central MO | Registered: 13 January 2014Reply With Quote
One of Us
Picture of Use Enough Gun
posted Hide Post
quote:
Fantastic. Functional and aesthetically pleasing. Love it.

+1 tu2
 
Posts: 18581 | Registered: 04 April 2005Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
A few more pics from Echols


Just a few Front sight and Peep combinations


Client has flown in to confirm the point of impact on his Gibbs prior to completion



Must be pretty close



The same 505 with my typical peep fit to a Square bridge



Full length



The front sight



458 Lott Legend with a peep I made used quite a bit



NECG Universal Front Ramp



The same style Legend Peep



Burgess Enfield 3UE 416 Rigby



Burgess Enfield 3UE fold up Peep



Burgess Fromt ramp



Recknagel Universal Barrel Band Front Ramp for the 450 Rigby below



 
Posts: 7828 | Registered: 31 January 2005Reply With Quote
new member
posted Hide Post
quote:
Originally posted by BaxterB:
A few more pics from Echols


Just a few Front sight and Peep combinations


Client has flown in to confirm the point of impact on his Gibbs prior to completion



Must be pretty close



The same 505 with my typical peep fit to a Square bridge



Full length



The front sight



458 Lott Legend with a peep I made used quite a bit



NECG Universal Front Ramp



The same style Legend Peep



Burgess Enfield 3UE 416 Rigby



Burgess Enfield 3UE fold up Peep



Burgess Fromt ramp



Recknagel Universal Barrel Band Front Ramp for the 450 Rigby below




Great pictures! Thank you!
 
Posts: 22 | Location: Texas | Registered: 15 July 2022Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by A.J.2:
quote:
Originally posted by BaxterB:
A few more pics from Echols


Just a few Front sight and Peep combinations


Client has flown in to confirm the point of impact on his Gibbs prior to completion



Must be pretty close



The same 505 with my typical peep fit to a Square bridge



Full length



The front sight



458 Lott Legend with a peep I've made and used quite a bit



NECG Universal Front Ramp



The same style Legend Peep



Burgess Enfield 3UE 416 Rigby



Burgess Enfield 3UE fold up Peep



Burgess Fromt ramp



Recknagel Universal Barrel Band Front Ramp for the 450 Rigby below




Great pictures! Thank you!
 
Posts: 708 | Registered: 30 December 2003Reply With Quote
One of Us
posted Hide Post
I have a peep sight on my .500 Jeffery..very fast to use..



 
Posts: 3974 | Location: Vell, I yust dont know.. | Registered: 27 March 2005Reply With Quote
One of Us
posted Hide Post
FYI the Interarms, Zastava etc actions made in Serbia are D&T-ed for Lyman or Redfield peep sights, even the LH models. I have a few rifles built on LH Zastava actions and had a Lyman sight set up for LH use.

On another rifle I acquired a pop-up peep sight from an early BRNO rifle and had that fitted to a LH CZ550. That’s quite a neat set up as you can use QD scope mounts giving you quick access to both sight options.
 
Posts: 504 | Location: Melbourne, Australia | Registered: 19 June 2006Reply With Quote
One of Us
Picture of Wstrnhuntr
posted Hide Post
Been comparing some budget rifles then I look in here and see this. ^^

What a monstrous contrast. Big Grin

That lefty Rigby on the bottom is stunning.



AK-47
The only Communist Idea that Liberals don't like.
 
Posts: 10189 | Location: Tooele, Ut | Registered: 27 September 2001Reply With Quote
one of us
posted Hide Post
Ive use the Lyman,Redfield,Marble peeps on my big bores and lighter guns as well, they work as well as a scope up to about 200 yards..

The Williams receiver sight is as good as any, I have several guns with the Williams
, some folks say they break easy, mine have not,but then some folks can break an anvil with a powder puff..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
I put aSkinner on my M70 416 REM. It works great. The only problem is that you can’t mount a scope as well.


USMC Retired
DSC Life Member
SCI Life Member
NRA Life Member
 
Posts: 730 | Location: Maryland Eastern Shore | Registered: 27 September 2013Reply With Quote
one of us
Picture of 458Win
posted Hide Post
I have a Brockman pop up peep sight on my M70 375 H&H and love it.


Anyone who claims the 30-06 is ineffective has either not tried one, or is unwittingly commenting on their own marksmanship
Phil Shoemaker
Alaska Master guide
FAA Master pilot
NRA Benefactor www.grizzlyskinsofalaska.com
 
Posts: 4211 | Location: Bristol Bay | Registered: 24 April 2004Reply With Quote
one of us
posted Hide Post
Tree em,
Id take that up with Jim, Ive never had a problem with Jim

If I were a guide today in DG areas, Id prefer a 20" carbine in a large bore 416 Rem or 404 or even a 458.. with a peep sight and take the disc out.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Buy Talley scope bases and get a Talley peep sight. It's quick detachable and interchangeable with a scope.


Quick, Cheap, or Good: Pick Two
 
Posts: 2176 | Location: Tennessee | Registered: 18 February 2007Reply With Quote
One of Us
posted Hide Post
I have a NEGC peep sight on my 416 Ruger. While I really like having a back up receiver sight I wish there was some way to store it on the rifle when not in use. NECG was not smart enough to make their trap door pistol grip cap compatible with with their sight or any other receiver sight that I know of.
 
Posts: 392 | Registered: 13 March 2006Reply With Quote
one of us
posted Hide Post
Ive used the Talley QD peep, its handy and you can carry it in your pocket. its a dandy but the peep on a talley is too small for my hunting I prefer the ghost peep..I also like the old REdfields and Marbles sands the disc..

Dont over look Redfields"Little blue peep" if you can find one..I have several of those. a work of art, simple and they sure do work..

I prefer a peep sight over a scope for most uses. but the option of a low power scope is handy..Peep for DG suits me best..

My all time favorite peep is the old Lyman mod 35 the is attached to the Mauser bolt release that come on my JP Sauer amd sohnsDeluxe 30-06. Hard to find and are all over place on price from $250 to $1600??? Id hold out for less than $250 myself.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of crshelton
posted Hide Post
They work fine for all my big bores.


NRA Life Benefactor Member,
DRSS, DWWC, Whittington
Center,Android Reloading
Ballistics App at
http://www.xplat.net/
 
Posts: 2294 | Location: Republic of Texas | Registered: 25 May 2009Reply With Quote
One of Us
posted Hide Post
If the gun has weaver bases, XS sights makes a backup sight in two heights. It comes with ghost ring and smaller aperture for about $75.


Quick, Cheap, or Good: Pick Two
 
Posts: 2176 | Location: Tennessee | Registered: 18 February 2007Reply With Quote
One of Us
Picture of Huvius
posted Hide Post
Peep sights are actually quite appropriate for dangerous game rifles.
W.J. Jeffery often fort them to their 450/400 Farquharson rifles and Holland and Holland used a flip up peep in the rib of their 500/465 Royal “India” models. They may have referred to the peep as the “India” sight.
Holland also had very elegant peeps, much like a Lyman staff, recessed into the top strap of some of their rifles - that’s a very nice feature.
 
Posts: 3395 | Location: Colorado U.S.A. | Registered: 24 December 2004Reply With Quote
One of Us
posted Hide Post
Kind of like these McLaughlin peeps, a Rigby style, they make sense to me , there if you want it, unobtrusive.



Krieghoff Classic 30R Blaser
Stevens 044-1/2 218 Bee
Ruger #1A 7-08
Rem 700 7-08
Tikka t3x lite 6.5 creedmo
Tikka TAC A1 6.5 creedmo
Win 1885 300H&H. 223Rem
Merkel K1 7 Rem mag
CCFR
 
Posts: 284 | Location: southern AB | Registered: 17 May 2011Reply With Quote
one of us
posted Hide Post
BTW don't discount the shallow V irons for up to 200 yds and on buffalo/Hippo I would feel good to 300 yds under rare circumstances like a wounded animal..I dont think most of our modern American shooters have shot the shallow V, but seem to condemn it, based on too many gun scribes articles..Its actually quite accurate and always there for you when things go South..Many of the barrel mounted iron sights Ive seen were never looked at and are for display, How so?? the sights are blocked by the scope basses is a dead give away! Roll Eyes


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
new member
posted Hide Post
quote:
Originally posted by Vol717:
If the gun has weaver bases, XS sights makes a backup sight in two heights. It comes with ghost ring and smaller aperture for about $75.


XS Sights also has a dedicated Winchester M70 sight with a Ghost Ring Rear, and a tall white stripped front sight. I've used these on Winchester 70, 416s and 458s

Also have the Mauser 98 variant on .35 Whelen and .416 Taylor.
They work for my eyes.
 
Posts: 14 | Registered: 01 November 2014Reply With Quote
One of Us
posted Hide Post
Before I needed glasses I had 375HH Whitworth with shallow V irons. Most people would not believe how accurate that sight is for decent eyes. I mean teapot at 225 yds!


IHMSA BC Provincial Champion and Perfect 40 Score, Unlimited Category, AAA Class.
 
Posts: 3419 | Location: Kamloops, BC | Registered: 09 November 2015Reply With Quote
one of us
posted Hide Post
The shallow V combined with a thin post and use flush with the top like a pistol sight picture is fast, accurate and seldom used these days but was a favorite on the lever action 92 and 94s of the Texas RAngers rifles, My Texas Ranger grandads 94 Trapper is so set up, and its been my favorite whitetail rifle over the years and its a 4 digit gun..Give it a try before you speak!! tu2


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
My pre-64 .458 came only with a peep with no rear sight provided. Smithson makes a peep that fits in the same recess as their detachable bases. Don’t forget that peeps were issued on M1s M14s and M16s. I started on them with a Sheridan air rifle as a kid and really enjoy them.
 
Posts: 102 | Registered: 17 February 2005Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
quote:
Originally posted by Kynoch:
My pre-64 .458 came only with a peep with no rear sight provided. Smithson makes a peep that fits in the same recess as their detachable bases. Don’t forget that peeps were issued on M1s M14s and M16s. I started on them with a Sheridan air rifle as a kid and really enjoy them.


Is the barrel tapped and just no rear sight installed? Or not tapped at all? I have seen one pre-64 458 - the one that the guy used to killed a tiger that ended up at the Smithsonian, that had a peep but no rear island sight - the barrel was tapped though.
 
Posts: 7828 | Registered: 31 January 2005Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Any thought on a peep sight for big bores?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia