THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Who makes Adams and Bennett barrels?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Who makes Adams and Bennett barrels? Login/Join
 
new member
posted
Bought a Savage action with bad barrel. Looking at one of the 25/06 Adams and Bennett barrels from Midway as a replacement. Who makes them and are they worth the money? Any body else make a replacement barrel that doesn't require a 6 month wait?
 
Posts: 18 | Registered: 07 December 2005Reply With Quote
one of us
posted Hide Post
I heard it was these guys
http://www.gmriflebarrel.com/
 
Posts: 501 | Location: San Antonio , Texas USA | Registered: 01 April 2002Reply With Quote
One of Us
posted Hide Post
Yep it green mountain at the moment. Mr Woodall at Lothar Walther said that whoever could build them the cheapes got the job. It was shaw and now its green mountain. I have installed a couple (not my bbl choice) and they machine great, and shot pretty darn good. Woody informed me that the easy machining was because its heavy sulphurized black powder steel. The two rifles I chambered hold under an inch, both rifles are bone stock and unbedded. I am not a great fan of them but man they are cheap. They will be just fine for a hunting rifle but don't enter a benchrest match with it. For the price I would jump on one in your situation, midway had some models on sale for $56.

Chad
 
Posts: 85 | Location: Oklahoma | Registered: 14 May 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Chad,
wasn't ever shaw... I called and spoke with them on the matter about 5 years ago.

I do understand it to be GM...

and the douglas/shaw/shilen rumors are exactly that...

and it's not bauska or pacnor...

but I haven't seen one yet that won't shoot

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40635 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Moderator
posted Hide Post
quote:
Originally posted by David Smith:
Bought a Savage action with bad barrel. Looking at one of the 25/06 Adams and Bennett barrels from Midway as a replacement. Who makes them and are they worth the money? Any body else make a replacement barrel that doesn't require a 6 month wait?


Contact Savage directly; they should make it right.

George


 
Posts: 14623 | Location: San Antonio, TX | Registered: 22 May 2001Reply With Quote
Moderator
Picture of Paul H
posted Hide Post
If you can get them under $100, they aren't bad for what they are. Expect a rough bore that will require alot of elbo greese to get clean. The will shoot reasonably accurately, especially if a good gunsmith chambers it and cleans up the crown. Course with the savage you're looking at a complete chambered barrel and likely so/so chamber and hence accuracy.

I'd personally much rather have one bolt gun with a good barrel well chambered than two mediocre rifles with mediocre barrels.


__________________________________________________
The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time.
 
Posts: 7213 | Location: Alaska | Registered: 27 February 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    Who makes Adams and Bennett barrels?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia