Normaly the quickload program has given me good numbers and matches very close to the actual results I get in my rifles. I ran some numbers for my 375 H&H with a 270 TSX and it was kicking back some realy goofy numbers. Basicaly telling me that the max loads I was finding in the load manuals were anywhere from 10-25K PSI over pressure. I worked up to the max loads in the manuals with no pressure signs.

Anyone else experience this?

email neco and ask ,, that means the starting pressure of the TSX is too high

Do your load manuals include pressure data? Pressure signs won't show up in a 375 H&H until pressures FAR exceed SAAMI specification, BTW.

.