quote:

Originally posted by Atkinson:
It should be hencforth known as the 400-3" RIP, but it does question your endowdness, is that a word, if not it is now..

Perhaps you should change your monaker from RIP to "Three Inch"

A classic example of "bore envy."

That was "big" of you rip

boomstick,
If I'm a 3-incher then Ray has got to be a 1.5-incher. That is why he is so preoccupied with the scaling concept, and has nightmares about Vienna Sausage harvesting. At least he is a better bull rider due to his anatomy, than most cowboys. You know, like those women on the mechanical bulls.

Back on topic, too much Deep Throat for an old cowpoke? Will tighten her up:

Talked to Hornady today about when 9.3x74R brass would be available. Lady checked on production and told me there is no specified date as yet...BUT, it is planned immediately after the backlog for loaded ammo is taken care of. Good News?

quote:

Originally posted by prof242:
Talked to Hornady today about when 9.3x74R brass would be available. Lady checked on production and told me there is no specified date as yet...BUT, it is planned immediately after the backlog for loaded ammo is taken care of. Good News?

Good news!
Go to PM.

RIP & Prof242,

if you need 20 pieces of brass for "tinkering" let me know and I'll donate some to the cause. I bought 500 for $70 per hundred last summer for my 38-90 Shiloh Sharps.

Rich
DRSS
Knowledge not shared is knowledge lost...

Rich,
Thanks for the donation. Please send what you can spare to prof242. Max is ".395 West" and he is stoked for the 400 NE and .395 Ruger Max.

".395 East" is me, and I am fiddling with the .398 Lapua Mag. and 40-07 also.

".395 South" is Gerard in RSA with the .395 GSC.

Maybe we need a ".395 North," like another bullet maker?

I think Ray Atkinson wants this new cartridge to be called the ".395 Peterlongo 3-inch."
That nomenclature reminds him of his wife sweet-talking him.

20 pieces of brass is now subject to the tender mercies of the USPS...enroute to the Springs.

Rich
DRSS
KNowledge not shared is knowledge lost...