The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores how to prime nitro casesGo | New | Find | Notify | Tools | Reply | |
| new member |
What do you guys use to prime nitro cases? Thanks in advance. CZ .416 Rigby Win. 70 .375 H&H NRA life SCI and DSC Retired Air Force E-8 | ||
|
Moderator |
rcbx aps benchprimer opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| one of us |
RCBS Rockchucker w priming die ... kind of a cheap APS. Just don't have enough space on the bench to permanently mount the APS. Mike -------------- DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ... Knifemaker, http://www.mstarling.com | |||
|
| one of us |
RCBS Hand Priming Tool is my favorite. I have 4 different hand priming tools, 3 of them are of my favorite RCBS make, one is a Lee, and I leave them all set up with the most commonly used shell holders, ready to go. One would do, with as-needed switching the shell holders, and primer plunger size. I do use the AmmoMaster press priming tool for 50BMG, but I like to hand prime the 470NE, 505 Gibbs, 450NE, etc.: Have shell holder, and it takes an F215, will hand prime. | |||
|
One of Us |
Priming arm on my Rockchucker press. SCI Life Member NRA Patron Life Member DRSS | |||
|
| one of us |
ditto  | |||
|
one of us |
RCBS bench mounted priming tool. Harris Safaris PO Box 853 Gillitts RSA 3603 www.southernafricansafaris.co.za https://www.facebook.com/pages...=aymt_homepage_panel "There is something about safari life that makes you forget all your sorrows and feel as if you had drunk half a bottle of champagne." - Karen Blixen, | |||
|
One of Us |
The handle broke on my Lee priming tool so now I use the arm on the Rockchucker. Hunting is getting as close as you can, shooting is getting as far away as possible. | |||
|
one of us |
Ditto If I have to prime cases with out a shell holder, a good flat spot on the bench, a hard wood dowel, and a hammer. Ain't that right jeffe.  Keith IGNORE YOUR RIGHTS AND THEY'LL GO AWAY!!! ------------------------------------ We Band of Bubbas & STC Hunting Club, The Whomper Club | |||
|
| Moderator |
opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
one of us |
Have used all of the above, except for the APS, and like the Lee unit the best. I can prime while watching television, or reading the AR forum! .395 Family Member DRSS, po' boy member Political correctness is nothing but liberal enforced censorship | |||
|
| one of us |
I wasn't aware you could prime nitro cases with the Lee. At least I can't with mine. Geronimo | |||
|
| One of Us |
I was going to say the same thing, my lee hand priming tool will barely let 375 H&H shells fit in, they kind of snap in. Maybe Lee opened them up a bit since mine was made. Mine was made before the feeder trays, and I have to feed each primer in by hand every round. | |||
|
| one of us |
I can prime up to .416 Rigby with my Lee Auto Prime. Lee make the shell holder but you have to open up the mouth of the priming tool where the shell holder sits in order to fit the shell in. I used a dremel for that. Just use the arm on the press for priming the big rimmed NE shells. Cheers. GG | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Big Bores how to prime nitro cases
Visit our on-line store for AR Memorabilia