THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Gun safes ????? Login/Join
 
One of Us
Picture of Cold Trigger Finger
posted
I don't have any idea what sub forum this should b in . Moderators feel free to move this thread to where it should be.

But, to the topic at hand .
Does anyone know of a site that rates gun safes ??
I'm looking for maximum fire protection and good theft proofing. Probably in the 24-30" wide range.


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
One of Us
Picture of Cougarz
posted Hide Post
Just a quick search of the Internet came up with these:

http://www.gunsafecritics.com/
https://thegunsafes.net/
http://gunsafereviewsguy.com/b...guide/best-gun-safe/
http://www.brownsafe.com/categ...itor_Comparison.html
http://www.gunsafecritics.com/...ng-guide-the-basics/


Roger
___________________________
I'm a trophy hunter - until something better comes along.

*we band of 45-70ers*
 
Posts: 2819 | Location: Washington (wetside) | Registered: 08 February 2005Reply With Quote
One of Us
Picture of A7Dave
posted Hide Post
Look through AMSEC's web site. They are UL and ETL (what ever that is) certified:

http://www.amsecusa.com/product/fv6030e5/

I've had an AMSEC safe for 30 years. If you are near a decent size locksmith company, go in and talk to them, they'll give you the best information. Most safe companies had to give in to the "China factor" - all of their low to mid grade safes are made there. If you're lucky, the higher end (better) will be actually made in the USA.


Dave
 
Posts: 928 | Location: AKexpat | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
I went with Liberty Safes. Lots of options and good customer service
 
Posts: 130 | Location: Ozarks | Registered: 04 August 2017Reply With Quote
One of Us
Picture of Cold Trigger Finger
posted Hide Post
I watched a destruction testing vid for Liberty safes last night. I was very impressed with the AMSEC fireproof ability. I really don't have a preference at this point between digital and tumbler locks. Except the tumbler doesn't need batteries.


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
one of us
posted Hide Post
Check out Sturdy Safe. They are great people and make a great safe in the USA.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
one of us
posted Hide Post
A lot depends on where you placing them what your major concern is.

I own a Cannon and a liberty they in in a corner of the basement in a harden room with extra fire protection built in.

If one can add extra protection to the area around the safe or the area they are place in.

Building in dead air space adds a huge amount of fire proofing. building extra protection to the access adds a lot of theft protection.

It is a lot cheaper to add some layers of sheet rock and good dead bolts to a room.

I added fireproof paint to the cabinet I placed the safes in.

Adding five min of extra access time is huge in a burglary situation.

A couple inches of sheet rock added to the walls ect with dead air space adds a huge amount of fire protection.
 
Posts: 19846 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
I have a Sturdy safe and I am very pleased with it.I had to pay a team of movers to bring it in because it was heavy.I feel I got my moneys worth because it is high quality and did not get ripped off with the shipping cost.I asked them before buying it what upgrade did they think was worth getting in terms of reinforcement and got it with what was suggested.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
one of us
posted Hide Post
CTF,

Remember that no matter how many guns they say their safe will handle it will not hold that many once you try to put them in there.

Mark


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 13119 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
one of us
posted Hide Post
quote:
Remember that no matter how many guns they say their safe will handle it will not hold that many once you try to put them in there.


I think those numbers are all Winchester 94s and no scopes.
 
Posts: 19846 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
When I built my house I had my contractor put in bolts into the concrete for my safes. I also never leave the house without setting the alarm.

Finally, a little off topic, but code required my house to have a sprinkler system - had a fire department guy in the house and he said they are absolutely the best fire protection.


Don't Ever Book a Hunt with Jeff Blair
http://forums.accuratereloadin...821061151#2821061151

 
Posts: 7583 | Location: Arizona and off grid in CO | Registered: 28 July 2004Reply With Quote
One of Us
posted Hide Post
quote:
I think those numbers are all Winchester 94s and no scopes.

It's a PITA, but if you remove the bolts on the rifles, and stand them alternating muzzle up, muzzle down next to each other, you'll get a bunch more in the safe. I put the bolts on the shelf and mark them to make sure I know which rifle they go back into.
 
Posts: 20177 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
posted Hide Post
Have a friend that had 2 Browning safes in his home. Total loss of home and safe contents, Krieghoff etc.
On first floor of wood frame house and found in basement.
Fire Chief said papers stored in safes may have ignited and contributed to loss of safe contents.
Scott
 
Posts: 124 | Location: Boiling Springs | Registered: 16 September 2011Reply With Quote
One of Us
posted Hide Post
If you really want protection, there are a few things to fully understand-

Gun Safes are not safes. They are Residential Security Containers. It's a totally different standard and set of requirements.

If you want a safe...buy a safe, not a residential security container.

Second- The safe is only the last line of defense. A solid home security system, strong doors, cameras, and so on...matter.

Fire is your biggest enemy in most cases. Even with a fire safe, you have major problems. Remember...it's not the fire, it's the soot, heat, water, and steam. That's what kills guns...not the flames.

Prevent fire at all costs.

One way to do this...build a simple room with good insulation and metal studs around your safe. Give them setback from walls and hot surfaces. Keep them 2-4 inches off the floor with airspace on all sides.

Lastly, safes love water. Buy the anti-rust products. A lot of great guns rust in a safe. Recoil pads don't age well with a gun on them. Carpet and felt can rust a gun where it is in contact.

Lots of CLP...and muzzle down storage.

Amsec is regarded as making the best safes in that business.
 
Posts: 164 | Registered: 19 January 2011Reply With Quote
One of Us
Picture of Cold Trigger Finger
posted Hide Post
So, it seems I should build a concrete vault with a fire door . Then put a good gun safe INSIDE it.
I wonder how hard it is to drill thru an A500 gong plate ?


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
one of us
posted Hide Post
I wouldn't get too paranoid about it.I suggest to just buy a heavy, quality safe and use common sense.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Cold Trigger Finger:
So, it seems I should build a concrete vault with a fire door . Then put a good gun safe INSIDE it.
I wonder how hard it is to drill thru an A500 gong plate ?


A torch is much faster.

If your dealing with your normal burglars any thing that offers any amount of resistant's will most likely work.

Really professionals well bring what they need to get into any thing given enough time.

Fire is a real danger it is not hard to add extra fire protection. Cement board, sheet rock, fire proofing paint, mineral wool insulation. And the most important dead air space.

Basement stay a lot cooler in a fire if you have any type of fire response. I seen sub floors survive when the top was a total lost.

Of course a fully under ground vault built off the basement would be ideal.
 
Posts: 19846 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
Picture of sambarman338
posted Hide Post
Sometimes you can get more guns into a safe than expected. I know of one made for 11 guns that has 14, 12 butt-down between spacers. It could also take another hung on the door. The bolts have to come out, of course. Putting an extra shelf in the bottom allows the actions/butts of a couple of db shotguns to be stowed underneath, with the barrels propped in corners.
 
Posts: 5193 | Location: Melbourne, Australia | Registered: 31 March 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by p dog shooter:
quote:
Originally posted by Cold Trigger Finger:
So, it seems I should build a concrete vault with a fire door . Then put a good gun safe INSIDE it.
I wonder how hard it is to drill thru an A500 gong plate ?


A torch is much faster.

If your dealing with your normal burglars any thing that offers any amount of resistant's will most likely work.

Really professionals well bring what they need to get into any thing given enough time.

Fire is a real danger it is not hard to add extra fire protection. Cement board, sheet rock, fire proofing paint, mineral wool insulation. And the most important dead air space.

Basement stay a lot cooler in a fire if you have any type of fire response. I seen sub floors survive when the top was a total lost.

Of course a fully under ground vault built off the basement would be ideal.



Basements flood and have high humidity...

I used to love the thought of a basement room....until I pumped the water out of it and dealt with the mold for years.

No more basements.

No amount of drains, sealants, or pumps would fix it.

YMMV...
 
Posts: 164 | Registered: 19 January 2011Reply With Quote
one of us
posted Hide Post
quote:
I used to love the thought of a basement room....until I pumped the water out of it and dealt with the mold for years.


All depends where it is located and the type of ground it is in.
 
Posts: 19846 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by lockingblock:
quote:
Originally posted by p dog shooter:
quote:
Originally posted by Cold Trigger Finger:
So, it seems I should build a concrete vault with a fire door . Then put a good gun safe INSIDE it.
I wonder how hard it is to drill thru an A500 gong plate ?



A torch is much faster.

If your dealing with your normal burglars any thing that offers any amount of resistant's will most likely work.

Really professionals well bring what they need to get into any thing given enough time.

Fire is a real danger it is not hard to add extra fire protection. Cement board, sheet rock, fire proofing paint, mineral wool insulation. And the most important dead air space.

Basement stay a lot cooler in a fire if you have any type of fire response. I seen sub floors survive when the top was a total lost.

Of course a fully under ground vault built off the basement would be ideal.



Basements flood and have high humidity...

I used to love the thought of a basement room....until I pumped the water out of it and dealt with the mold for years.

No more basements.

No amount of drains, sealants, or pumps would fix it.

YMMV...


+1
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
One of Us
posted Hide Post
A caution about putting safes or safe rooms in basements. In a serious fire, that basement will be filled up by water during fire suppression efforts. The upper floor contents may collapse into the basement in a serious fire, greatly delaying recovering the safe contents.

Sprinklers offer the best protection.
 
Posts: 113 | Location: Maryland 's Eastern Shore | Registered: 03 February 2016Reply With Quote
one of us
posted Hide Post
quote:
The upper floor contents may collapse into the basement in a serious fire, greatly delaying recovering the safe contents.


And that happens when your safe collapse's into the basement also.
 
Posts: 19846 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
If we are talking pure ideal best way to do it...

The safe would ideally be in a detached structure, strongly constructed, fire resistant, and with max security systems. A small building behind the house for example...metal door in a metal frame, opening out. No windows, a few skylights are ok.

Wire with spark arresting breakers.

Add fire sprinklers if you wish, but be aware that they can leak and it's messy.
 
Posts: 164 | Registered: 19 January 2011Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia