THE ACCURATERELOADING.COM BIG BORE FORUMS

Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
.450 Dakota question??? Login/Join
 
Canuck
Moderator
Picture of Canuck
posted Hide Post
quote:
Your rifle is the "First Generation" RSM with heavy 24" long barrel (.820" at the muzzle) and with the front sling base coming through the forearm on a barrel band inletted into the forearm.

The "Second Generation" RSM was a few years after that, with front sling base on a barrel band out beyond the forend, same barrel.

The "Third Generation" RSM came a few years later still, with 23" barrel length and 0.750" muzzle diameter.


Correct on all counts, near as I've been able to figger. Smiler

Do you know what the difference in weight is between Gen 1 and Gen 3? My Gen 1 is pretty barrel heavy, although that's a positive thing with the 470 Mbogo.

quote:
Does your "First Generation" RSM have the same recoil plate bedding sysyem as all the others?


I haven't had any newer ones handy to compare it to, but, yep...it does have a recoil plate bedding system. I don't know if it changed over the generations at all.

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
Hmm,
rotflmo
While which MODEL ruger it started as is great news, I really meant, was that the one Dave had rebored cheers


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40240 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
RIP
one of us
posted Hide Post
Canuck,
In .416 Rigby, Generation One and Two RSM's are about 10.5 to 10.75 lbs., depending on wood.

Generation Three RSM in .416 Rigby was exactly 9.5 lbs for the one I weighed.
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With Quote
Canuck
Moderator
Picture of Canuck
posted Hide Post
quote:
While which MODEL ruger it started as is great news, I really meant, was that the one Dave had rebored


Ahhhh...I get it now. Smiler You got my brain off track with the reference to Mark I. Big Grin YES, it is the original 470 Mbogo (#1 of all time)...the one that Dave E had rebored and took to Tanz...and the one that I bought from him and then subsequently gave a return visit to Tanz. It now has 6 notches in it...3 from Dave and 3 from me.

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
Idaho Sharpshooter
One of Us
posted Hide Post
Canuck,

how long is that magazine box, for ID?

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
BigFiveJack
One of Us
posted Hide Post
wave Steve Lefforge you have a PM



Jack

OH GOD! {Seriously, we need the help.}
 
Posts: 2791 | Location: USA - East Coast | Registered: 10 December 2005Reply With Quote
ScottS
one of us
posted Hide Post
Idahosharpshooter,

RSM mag box dimensions are:

Length: 3.795"
Width @ rear: 1.062"
Width @ front: 0.937"
Depth @ rear: 1.160"
Depth # front: 0.993"
 
Posts: 1662 | Location: USA | Registered: 27 November 2003Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia