The Accurate Reloading Forums
.450 Dakota question???

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/320104945

10 October 2006, 10:46
Canuck
.450 Dakota question???
quote:
Your rifle is the "First Generation" RSM with heavy 24" long barrel (.820" at the muzzle) and with the front sling base coming through the forearm on a barrel band inletted into the forearm.

The "Second Generation" RSM was a few years after that, with front sling base on a barrel band out beyond the forend, same barrel.

The "Third Generation" RSM came a few years later still, with 23" barrel length and 0.750" muzzle diameter.


Correct on all counts, near as I've been able to figger. Smiler

Do you know what the difference in weight is between Gen 1 and Gen 3? My Gen 1 is pretty barrel heavy, although that's a positive thing with the 470 Mbogo.

quote:
Does your "First Generation" RSM have the same recoil plate bedding sysyem as all the others?


I haven't had any newer ones handy to compare it to, but, yep...it does have a recoil plate bedding system. I don't know if it changed over the generations at all.

Cheers,
Canuck



10 October 2006, 15:55
jeffeosso
Hmm,
rotflmo
While which MODEL ruger it started as is great news, I really meant, was that the one Dave had rebored cheers


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
10 October 2006, 17:20
RIP
Canuck,
In .416 Rigby, Generation One and Two RSM's are about 10.5 to 10.75 lbs., depending on wood.

Generation Three RSM in .416 Rigby was exactly 9.5 lbs for the one I weighed.
11 October 2006, 07:04
Canuck
quote:
While which MODEL ruger it started as is great news, I really meant, was that the one Dave had rebored


Ahhhh...I get it now. Smiler You got my brain off track with the reference to Mark I. Big Grin YES, it is the original 470 Mbogo (#1 of all time)...the one that Dave E had rebored and took to Tanz...and the one that I bought from him and then subsequently gave a return visit to Tanz. It now has 6 notches in it...3 from Dave and 3 from me.

Cheers,
Canuck



12 October 2006, 03:17
Idaho Sharpshooter
Canuck,

how long is that magazine box, for ID?

Rich
12 October 2006, 07:15
BigFiveJack
wave Steve Lefforge you have a PM



Jack

OH GOD! {Seriously, we need the help.}

12 October 2006, 18:41
ScottS
Idahosharpshooter,

RSM mag box dimensions are:

Length: 3.795"
Width @ rear: 1.062"
Width @ front: 0.937"
Depth @ rear: 1.160"
Depth # front: 0.993"