ACCURATERELOADING.COM MUZZLELOADING BIG GAME HUNTING FORUM


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Bullet for Grizzly
 Login/Join
 
One of Us
posted
What bullet would you use? I shoot a .50 caliber Omega.

Been looking at 250-340 grains in Barnes, Swift, Precision Dead Center and Hornady MonoFlex.
 
Posts: 77 | Location: Texas | Registered: 04 November 2005Reply With Quote
one of us
posted Hide Post
I would use my slightly hardened paper patched Lee 500 S&W bullet. It weighs 460 grains and is a tack driver. I pushed one through a elk shoulder and found the bullet in her hip. I have seen a lot of animals killed with that bullet and that is thee only one that I have found.
 
Posts: 987 | Location: Southern Idaho | Registered: 24 March 2002Reply With Quote
One of Us
posted Hide Post
Not that I've ever gone grizzly hunting.....of the bullets you mention I'd trust the Swift or call Wideners reloading supply for some .451 Nosler 300gr.Partition PP...I believe they still have some.....bearit....
 
Posts: 54 | Registered: 09 February 2006Reply With Quote
One of Us
posted Hide Post
Thanks for the suggestion. I'll check with them.
 
Posts: 77 | Location: Texas | Registered: 04 November 2005Reply With Quote
One of Us
posted Hide Post
You need to shoot a hardcast 500 or so grain bullet like a Maxi Ball or that hardcast 460 grain bullet for the 500 S&W. Learn to paper patch if you have to, but stay away from the lightweight jacketed cup and core bullets.

You want to be sure you can shoot all the way through both shoulders or from chest to bung hole end to end if need be. You won't reliably get there with a 350 grain bullet.

Last week we were hunting bison, and a friend shot a 3 year old bull in the chest with a 500 grain cast bullet pushed by 70 grains of 2f black powder using a 45-70 Sharps. The meat processor found the bullet in the bull's pelvis. It had penetrated 72 inches of bison front to rear by actual measurement. the 30-1 alloy bullet had lost 4 grains of weight.
 
Posts: 807 | Location: East Texas | Registered: 03 November 2007Reply With Quote
One of Us
posted Hide Post
smokepole paul....If you would decide to go with non cup and core bullets you can use whatever .458 bullet you have confidence in with a MMP orange sabot. My 25" barrel MZ gets about 2025fps. with a 300gr. over the max of Blackhorn 209....a fair amount of snot with a good bullet....regards ....bearit....
 
Posts: 54 | Registered: 09 February 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by bearit:
smokepole paul....If you would decide to go with non cup and core bullets you can use whatever .458 bullet you have confidence in with a MMP orange sabot. My 25" barrel MZ gets about 2025fps. with a 300gr. over the max of Blackhorn 209....a fair amount of snot with a good bullet....regards ....bearit....


Thanks bearit....This will help. That's honking velocity for a 300 gr. bullet. I'll give it a try.
 
Posts: 77 | Location: Texas | Registered: 04 November 2005Reply With Quote
One of Us
Picture of waterrat
posted Hide Post
This was killed with a 525 penetrator is what the huner told me,I can't remember if it was 45 or 50 cal but the rifle was a Gonic? Short hunt and we never yakked too much. The bear was 8' just up the crik on Fog Lake.


I tend to use more than enough gun
 
Posts: 1415 | Location: lake iliamna alaska | Registered: 10 February 2005Reply With Quote
One of Us
Picture of waterrat
posted Hide Post
Wrong pic,,I'll try again.

No luck,,in photobucket hell for a bit.


I tend to use more than enough gun
 
Posts: 1415 | Location: lake iliamna alaska | Registered: 10 February 2005Reply With Quote
One of Us
posted Hide Post
smokepole paul....did Wideners come through with the partitions?....If you need some others to try .451 and .458 300gr. to 500gr. PM me....regards....bearit....
 
Posts: 54 | Registered: 09 February 2006Reply With Quote
One of Us
posted Hide Post
I would have no problem using this bullet for grizzly, it has proven it self many times already, best of both worlds, added trauma and penetration.

https://cuttingedgebullets.com...ction&key=MZL_50_250


Simply, Elegant but always approachable
 
Posts: 354 | Location: New Jersey | Registered: 24 May 2011Reply With Quote
One of Us
posted Hide Post
I haven't heard of this one. Thanks for posting it...I'll give them a try.
 
Posts: 77 | Location: Texas | Registered: 04 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by smokepole paul:
I haven't heard of this one. Thanks for posting it...I'll give them a try.


I have been extremely impressed with this bullet, accuracy is outstanding and terminals are second to none.


Simply, Elegant but always approachable
 
Posts: 354 | Location: New Jersey | Registered: 24 May 2011Reply With Quote
One of Us
posted Hide Post
Cutting Edge bullets are top shelf, from VLD target bullets to big African open-nose and solids.
 
Posts: 20175 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
Picture of L. David Keith
posted Hide Post
What Seasons44 said; Cutting Edge Bullets produce drastic trauma on big game. They proved themselves in Africa on all dangerous game and here is evidence of their effectiveness on medium game (deer). Bullet used was a .45 caliber CEB Raptor pushed by 100 grains of 777 powder (loose) at 120 yards. The photo below reveals what just one of the petals did to the off side shoulder blade.

This next photo shows damage caused underneath the front facing shoulder. Main body of the CEB exited the far side but was snapped back into the wound channel by the elastic membrane. Buck dropped in his tracks.

Good luck on your Griz hunt. LDK


Gray Ghost Hunting Safaris
http://grayghostsafaris.com Phone: 615-860-4333
Email: hunts@grayghostsafaris.com
NRA Benefactor
DSC Professional Member
SCI Member
RMEF Life Member
NWTF Guardian Life Sponsor
NAHC Life Member
Rowland Ward - SCI Scorer
Took the wife the Eastern Cape for her first hunt:
http://forums.accuratereloadin...6321043/m/6881000262
Hunting in the Stormberg, Winterberg and Hankey Mountains of the Eastern Cape 2018
http://forums.accuratereloadin...6321043/m/4801073142
Hunting the Eastern Cape, RSA May 22nd - June 15th 2007
http://forums.accuratereloadin...=810104007#810104007
16 Days in Zimbabwe: Leopard, plains game, fowl and more:
http://forums.accuratereloadin...=212108409#212108409
Natal: Rhino, Croc, Nyala, Bushbuck and more
http://forums.accuratereloadin...6321043/m/6341092311
Recent hunt in the Eastern Cape, August 2010: Pics added
http://forums.accuratereloadin...261039941#9261039941
10 days in the Stormberg Mountains
http://forums.accuratereloadin...6321043/m/7781081322
Back in the Stormberg Mountains with friends: May-June 2017
http://forums.accuratereloadin...6321043/m/6001078232

"Peace is that brief glorious moment in history when everybody stands around reloading" - Thomas Jefferson

Every morning the Zebra wakes up knowing it must outrun the fastest Lion if it wants to stay alive. Every morning the Lion wakes up knowing it must outrun the slowest Zebra or it will starve. It makes no difference if you are a Zebra or a Lion; when the Sun comes up in Africa, you must wake up running......

"If you're being chased by a Lion, you don't have to be faster than the Lion, you just have to be faster than the person next to you."
 
Posts: 6825 | Location: Tennessee | Registered: 18 December 2006Reply With Quote
One of Us
posted Hide Post
It's starting to get too expensive to read this thread....Okay already I'll have to get a few Raptors to test at max velocity in my MZ rifles...Thank you smokepole paul for starting this thread.....bearit....
 
Posts: 54 | Registered: 09 February 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by bearit:
It's starting to get too expensive to read this thread....Okay already I'll have to get a few Raptors to test at max velocity in my MZ rifles...Thank you smokepole paul for starting this thread.....bearit....


No problem bearit. I've enjoyed the information that's been posted.
 
Posts: 77 | Location: Texas | Registered: 04 November 2005Reply With Quote
one of us
posted Hide Post
What you shoot grizzly with is important no doubt but having a second rifle or two extra would be my advise..I would feel more comfortable with at least two 54 calibers on hand. I visualize myself trying to load a muzzle loader with a bear doing 40 miles an hour to eat my lunch!.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42242 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
posted Hide Post
I think you may wish you had another rifle other than an Omega when you to shooting 400+ grain bullets with heavy charges.


WHUT?
 
Posts: 371 | Location: Missouri, USA | Registered: 25 December 2002Reply With Quote
one of us
posted Hide Post
I would use the same bullet I used for elk some years ago, It was a very heavy hard cast simi wadcutter specifically for my rifle. The bullets were made for me by a close friend, now deceased, who was a Muzzle loading fanatic, and a hell of a gunsmith..I think they were 500 gr. bullets but wouldn't swear to it..I know they sure would lay a elk, moose or bear down in a hurry..He shot a lot of elk and Moose with a round patch ball in his 50 and 54, If he needed more he woul drag out the demon, a 64 cal. or his 4 bore double..I shot the 4 bore once and only once..I vow it was grizzly medicine.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42242 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia

 

image linking to 100 Top Hunting Sites