THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    9.3 X 62 barrel length/contour question

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
9.3 X 62 barrel length/contour question
 Login/Join
 
One of Us
posted
i picked up a weatherby vanguard action for this build.
what length and contour is recommended for the best BALANCE?
i have seen barrels from 19.25 to 26" with #2 contour to full bull.
this will go in a quality synthetic stock w/ 14.5 LOP.
thanks--cam
 
Posts: 157 | Location: san francisco bay area | Registered: 23 November 2007Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
I happen to like a #3 and 22 or 24".


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
I like mine about 22 inches, but friends have them at 19 to 20, and they swear by them. Most of mine are 17mm at the muzzle, not sure what contour that would compare too.


There are no fleas on the 9.3s

http://www.blaserbuds.com/forum/
 
Posts: 490 | Registered: 01 February 2007Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
light as possible, no more than 23", no less than 18 ... everything else is a matter of your preferences at the moment


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40017 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of GSSP
posted Hide Post
Mine is a #3 Pacnor 24" SS. Pre 64 M70 in a D'Arcy Echols stock with Leupold VX3 1.75-6 w/ CDS elev dial in Leupold AR rings/bases and it weighs......







Alan
 
Posts: 1719 | Location: Utah | Registered: 01 June 2004Reply With Quote
one of us
Picture of TC1
posted Hide Post
I went 20.5". I've only owned one so I have nothing to compare it to but I really like it.

Terry


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
One of Us
Picture of DuggaBoye
posted Hide Post
quote:
Originally posted by jeffeosso:
light as possible, no more than 23", no less than 18 ... everything else is a matter of your preferences at the moment


+1 Almost

substitute 24" as a maX


DuggaBoye-O
NRA-Life
Whittington-Life
TSRA-Life
DRSS
DSC
HSC
SCI
 
Posts: 4593 | Location: TX | Registered: 03 March 2009Reply With Quote
One of Us
posted Hide Post
The x62 seems to work well in barrels between 52-58 cm (21-23 inches)

M
 
Posts: 413 | Location: Norway | Registered: 14 May 2009Reply With Quote
one of us
Picture of z1r
posted Hide Post
It also works well in 25.6" barrels. I have them currently ranging from 22" to 26". My go to 9,3x62 wears a 24" bbl. Depending on the type of rifle you want to build 20" to 26" would be fine.




Aut vincere aut mori
 
Posts: 4865 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
One of Us
Picture of FOOBAR
posted Hide Post
I put a Lothar Walther #722 25.59" on my VZ-24 then cut it to ~22.5" and added a brake that brought the overall length back up to 25".

It looks a little skinny, tho'...maybe the #724, same length but a slight bit fatter would look and forward balance a bit better...who knows...the 22.5" velocity is plenty good with 270 and 286 gr Hornady's.

Whatever length you use is basically a personal bias and a slight increase in velocity with the longer tubes.

What about doing a 9.3 Ruger?? Seems to be a bit of interest in that one lately...definitely more ballistic possibilities...wish the Ruger case had beed available when I did mine, I would have jumped on it.

Just a thought...

LUCK
 
Posts: 1338 | Registered: 19 January 2006Reply With Quote
One of Us
Picture of Snellstrom
posted Hide Post
Mine has a 20" barrel in an ultra light contour, measures .59" at the muzzle.
With scope 7 pounds 14 ounces.
Kinda pounds you a bit from the bench with full power 285 grain bullets. (I know 9.3's don't kick but this one does)
It handles and carries really nice though and can shoot under an inch (.6") 3 shots if I do my part.


 
Posts: 5604 | Location: Eastern plains of Colorado | Registered: 31 October 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    9.3 X 62 barrel length/contour question

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia