The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Medium Bore Rifles The "hole in my safe" - what next?Go | New | Find | Notify | Tools | Reply | |
| The "hole in my safe" - what next? | Login/Join |
One of Us |
Ok, so if I were to go with a 300 H&H, what would be the best build process? Pre-64 Winnie Action from the factory, but already cut as a 300? Start with a used .375 H&H action and rebarrel? If I went with an older rifle, I'm likely looking at a big restocking project - which is fine. I like wood! Thoughts? Regards, Robert ****************************** H4350! It stays crunchy in milk longer! | |||
|
One of Us |
Yes...start there and work up. If you look...you can find one! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ J. Lane Easter, DVM A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991. | |||
|
| One of Us |
Why??? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ J. Lane Easter, DVM A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991. | |||
|
| One of Us |
That's a fair point on the restocking. Regards, Robert ****************************** H4350! It stays crunchy in milk longer! | |||
|
| One of Us |
P-64 if you put in the time looking for a rifle. Or you can use any M70 Classic. I have one in 270 and was quoted about 200$ to open the bolt face, change the bolt stop and remove the magazine block to make it full length. These can be had around 5-700$ One could also do the same with a CZ550. If you wanted to start from scratch you can buy CZ550 actions from Midway and I think Brownells, just get a magnum length box with a .532 bolt and you're good to go. I love the 300 Win, its a great cart. But you have a safe full of CLASSIC carts like the 7x57 and 375. Put another one in there to keep them company  If you think every possible niche has been filled already, thank a wildcatter! | |||
|
One of Us |
How about a 111 Savage TH in 25-06...   | |||
|
| One of Us |
Already got a Rem. M7MS in .257 Roberts.  My namesake...how could I not?Regards, Robert ****************************** H4350! It stays crunchy in milk longer! | |||
|
one of us |
Here ya go! Winchester M70 Supergrade: http://www.winchesterguns.com/...mily=001C&mid=535107 Take your pick - 270, 30/06 or 300WM ________ Ray | |||
|
| One of Us |
Ok, so I DID buy a rifle! Just put some money down on one! And since it's going to take 10 days to get here (/sigh) we can all play 20 questions! First hint: Yes, it's used. Regards, Robert ****************************** H4350! It stays crunchy in milk longer! | |||
|
| Powered by Social Strata | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Medium Bore Rifles The "hole in my safe" - what next?
Visit our on-line store for AR Memorabilia