The Accurate Reloading Forums
475 linebaugh power, 480 ruger length 1.285" 475-500 linebaugh

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2911043/m/260107166

24 April 2007, 12:29
PWS
475 linebaugh power, 480 ruger length 1.285" 475-500 linebaugh
Bottleneck revolver rounds are historically problematic. I agree with what everyone is saying about a .475/500 not being a very good idea, let alone a reality.

I just read some on Linebaughs website and found it quite interesting that he has settled on a mid/heavy bullets per each cartridge and a velocity around 1200. My own bumblings with .44s, .45s, and a .475 led me to similar conclusions. He knows what he speaks and is very "balance" oriented. A bottleneck .475LB on a .480DA frame is about as tippy as it gets.
24 April 2007, 20:45
boom stick
well if 1200 is the magic number o.k. but i think the reason for the bigger bullet is the heavier bullets...if the casull does 400 @ 1200 than the ruger should be in the 440 to 460 in range of weights imho not that their are flies on the 400 or 420's


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
24 April 2007, 21:29
Paul H
My thought is, once you get consistent exits, the only way to gain power is to up diameter.

I have a feeling there are a limited number of times a game animal would keep a 400 gr 475 hardcast launced at 1200 fps inside it's body, hence going up in caliber and bullet weight would be the way to go.

The other problem with the proposed wildcat is that the 500L opperates at lower pressures than the 475, so what you'd gain in case capacity would be lost in lower operating conditions.

And finally to the suggestion of polishing the chambers in my cylinder, I like the fact that factory loads are slightly sticky, as I can work up loads and have an indication of what pressures I'm running. So long as it doesn't stick, I'm under factory levels, and thats the way I like it.


__________________________________________________
The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time.
24 April 2007, 22:38
boom stick
great points paul...

the bottleneck idea is dead to me...

long loaded 460's...well...

i guess i need to learn how to conform...arghhrghh!!!


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
26 April 2007, 05:32
Lar45
Lee Martin (from the link at the beginning of this thread http://www.singleactions.com/) has a couple of aritcles about bottleneck cases in converted Rugers. It sounds like he hasn't had hardly any problems with his conversions.
I do agree that a bottlenecked 475 on a Ruger would not return much if anything. With a lager case, the pressures would have to be kept down and you might not gain any extra velocity.


Lar45

White Label Lube Co.
www.lsstuff.com
Carnauba Red high speed cast bullet lube.