THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
making 7mm wsm from 270 wsms
 Login/Join
 
One of Us
posted
Ok I picked up the wrong bag. now knowing the there is difference in the 2 cases. here 's the plan,bottom of the Sierria charge list (61g of H1000) a 175g sierria SPBT, set as far out that can be still held in the case.
In my little mind; the bullet should hold the case back agianst the bolt face, like fire forming for the Ackly's, and the shoulder should move forward??????


Live every day like it was your last, because someday it will be!!!
 
Posts: 140 | Location: N. E. Ohio | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
Should work, but I'd use the fastest powder listed for the 7mm WSM. I'd worry about funny pressure excursions with H1000.
 
Posts: 56 | Registered: 13 January 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
isn't the 7wsm shoulder slightly different than the rest of them, to prevent you from closing the bolt on a 7 in a 270?

(chekcing ammo guide)

7wsm shoulder is at 1.701
270 is 1.664 ..

.037 "headspace? ... you could get casehead seperations, i would take them back, or sell them here on ar

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40036 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
fired 5 this morning = no problems!!!


Live every day like it was your last, because someday it will be!!!
 
Posts: 140 | Location: N. E. Ohio | Registered: 04 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia