The Accurate Reloading Forums
making 7mm wsm from 270 wsms

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/804102395

26 December 2006, 06:57
DLH4570
making 7mm wsm from 270 wsms
Ok I picked up the wrong bag. now knowing the there is difference in the 2 cases. here 's the plan,bottom of the Sierria charge list (61g of H1000) a 175g sierria SPBT, set as far out that can be still held in the case.
In my little mind; the bullet should hold the case back agianst the bolt face, like fire forming for the Ackly's, and the shoulder should move forward??????


Live every day like it was your last, because someday it will be!!!
27 December 2006, 02:40
MichiganScott
Should work, but I'd use the fastest powder listed for the 7mm WSM. I'd worry about funny pressure excursions with H1000.
27 December 2006, 04:47
jeffeosso
isn't the 7wsm shoulder slightly different than the rest of them, to prevent you from closing the bolt on a 7 in a 270?

(chekcing ammo guide)

7wsm shoulder is at 1.701
270 is 1.664 ..

.037 "headspace? ... you could get casehead seperations, i would take them back, or sell them here on ar

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
27 December 2006, 05:40
DLH4570
fired 5 this morning = no problems!!!


Live every day like it was your last, because someday it will be!!!