THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
powder puff loads for a 376
 Login/Join
 
One of Us
posted
anyone got hard daya that they will share on a mild load with 200-210-225 loads for the 376 steyr?
i am looking for a plinker load to practice with. thanks
 
Posts: 3986 | Location: in the tall grass "milling" around. | Registered: 09 December 2006Reply With Quote
one of us
posted Hide Post
Hornady lists their 225g#3706sp W / WLR primer, H332 powder from 47.4g@2400fps to 61.3g@2800fps beer
 
Posts: 2351 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
one of us
posted Hide Post
You might interpolate data from the 375 H&H using SR4759.

Check the data from a Speer manual with their 235 grain bullet.
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
one of us
posted Hide Post
Use 60% of the top listed H4895 load. Perfectly safe, and very gentle. If you go to the Hodgdon website, it will give you details on their 60% loads.


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
One of Us
posted Hide Post
I was thinking along the lines of pistol powder. someone said 11 gr of unique would be a nice light plinking load.
 
Posts: 3986 | Location: in the tall grass "milling" around. | Registered: 09 December 2006Reply With Quote
One of Us
Picture of Rick R
posted Hide Post
I've tried 10gr Unique with a 250gr cast bullet and wasn't impressed. Accuracy was poor and it didn't hit anywhere near POA.

I use a couple of grains less than the minimum load of Benchmark with the Hornady 225gr bullet and recoil is 30-06ish. Not powder puff but reduced a bit and accuracy is about the same as 270-300gr full tilt loads.

hth
 
Posts: 1912 | Location: Charleston, WV, USA | Registered: 10 January 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia