The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading 458wm plinking loadsGo | New | Find | Notify | Tools | Reply | |
| 458wm plinking loads | Login/Join |
| One of Us |
I would like to use some of the powder I have to make up some plinking loads, I'm using the 405 grain Remington bullets I would like to use some longer cut powder (fills the case better) I have some IMR 4350 and some IMR 4064 and I want the velocities to be around 1900fps any suggestions? "An individual with experience is never at the mercies of an individual with an argument" | ||
|
| one of us |
From Lyman, 45th edition. Starting loads 405 gr jacketed bullet; IMR 4064 67 grains for 1949fs. IMR 4350 72 grains for 1733fps. MAX loads; IMR 4064 74 grains for 2127fps. IMR 4350 80 grains for 1923 fps. Max loads were compressed. I would prefer IMR 4064. I always used IMR 3031 for the 458, because I always had a lot of it on hand. DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
| One of Us |
Appreciate the info this is what I'm looking for. "An individual with experience is never at the mercies of an individual with an argument" | |||
|
Moderator |
my plinking load is rel7 and setting at the first groove, so its short. opinions vary band of bubbas and STC hunting Club Words aren't Murder - Political assassination is MURDER Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
What about using Trail Boss for a reduced load. I haven't done it, but it should work real well. velocity is like a new car, always losing value. BC is like diamonds, holding value forever. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia