The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading 458wm plinking loadsGo | New | Find | Notify | Tools | Reply | |
| 458wm plinking loads | Login/Join |
| One of Us |
I would like to use some of the powder I have to make up some plinking loads, I'm using the 405 grain Remington bullets I would like to use some longer cut powder (fills the case better) I have some IMR 4350 and some IMR 4064 and I want the velocities to be around 1900fps any suggestions? "An individual with experience is never at the mercies of an individual with an argument" | ||
|
| one of us |
From Lyman, 45th edition. Starting loads 405 gr jacketed bullet; IMR 4064 67 grains for 1949fs. IMR 4350 72 grains for 1733fps. MAX loads; IMR 4064 74 grains for 2127fps. IMR 4350 80 grains for 1923 fps. Max loads were compressed. I would prefer IMR 4064. I always used IMR 3031 for the 458, because I always had a lot of it on hand. DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
| One of Us |
Appreciate the info this is what I'm looking for. "An individual with experience is never at the mercies of an individual with an argument" | |||
|
Moderator |
my plinking load is rel7 and setting at the first groove, so its short. opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
What about using Trail Boss for a reduced load. I haven't done it, but it should work real well. velocity is like a new car, always losing value. BC is like diamonds, holding value forever. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia