THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
XL 650 set up Question
 Login/Join
 
One of Us
posted
I have finally set up my xl 650 in 45/70 cal and am ready to do a run, it was pretty daunting when I first un packed it but ut all seems logical.

One thing.......the powder bar is just not quite returning home after I cycle a case through taht station......is it simply a question of adjusting the "powder bar return Rod" with the wing nut and little spring until it returns or is there something else I am missing ??

Regards PC.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
btt
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
new member
Picture of Kenpo_Joe
posted Hide Post
Yes, you need to adjust the wing nut so that the spring is half compressed when the handle is pushed all the way forward.


Back on mute. Cool


Meddle not with dragons, for you are good and crunchy with ketchup.
 
Posts: 37 | Registered: 28 December 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Kenpo_Joe:
Yes, you need to adjust the wing nut so that the spring is half compressed when the handle is pushed all the way forward.


Back on mute. Cool


Kenpo....thankyou for your help, I assume you mean when the handle is in the raised position (at rest not at the bottom) ??

Regards PC.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia