The Accurate Reloading Forums
XL 650 set up Question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/362100833

22 September 2005, 11:57
PC
XL 650 set up Question
I have finally set up my xl 650 in 45/70 cal and am ready to do a run, it was pretty daunting when I first un packed it but ut all seems logical.

One thing.......the powder bar is just not quite returning home after I cycle a case through taht station......is it simply a question of adjusting the "powder bar return Rod" with the wing nut and little spring until it returns or is there something else I am missing ??

Regards PC.
22 September 2005, 17:59
PC
btt
22 September 2005, 19:52
Kenpo_Joe
Yes, you need to adjust the wing nut so that the spring is half compressed when the handle is pushed all the way forward.


Back on mute. Cool


Meddle not with dragons, for you are good and crunchy with ketchup.
23 September 2005, 02:42
PC
quote:
Originally posted by Kenpo_Joe:
Yes, you need to adjust the wing nut so that the spring is half compressed when the handle is pushed all the way forward.


Back on mute. Cool


Kenpo....thankyou for your help, I assume you mean when the handle is in the raised position (at rest not at the bottom) ??

Regards PC.