The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Dies for a 300WSM/416Go | New | Find | Notify | Tools | Reply | |
| Dies for a 300WSM/416 | Login/Join |
One of Us |
We are re barreling a M70 in .300WSM to .416 Cal. Any ideas where we can get a set of Reloading Dies? | ||
|
One of Us |
check out www.ch4d.com they should have what your looking for. ''People should say what they mean and mean what they say. Life is too short to be lead down the wrong path.'' | |||
|
| One of Us |
Thanks, Will do. | |||
|
Moderator |
if its a straight neck out,... have a machinest buddy modify a set of 300wsm opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
We had planned on trying that, but now we have set coming from CH4D. | |||
|
| one of us |
A friend of mine have a 300/458 made, but I dont know who did the job. I'll ask him. He is in here sometimes, as "afterburner". *Treat problems like a dog; Take a sniff ..... If it can't be killed, eaten, or fucked? Just pie on it, and walk on!:-) Arild. | |||
|
| Moderator |
Larry - trust me... bore out a set of 300 wsm dies, for a working set -- heat treat can wind up take several times longer than expect. get a lyman set of wsm and rigby and "make a set" between them opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
I have a set coming from CH 4D. Thanks guys.  | |||
|
| One of Us |
Received the Dies from CH-4D yesterday. They look good. I had taken some Barnes solids and turned one end down to about .338, .350, & .375 Using my RCBS .416 Collet in my Bullet Puller I opened the neck on some .300 wsm brass. Then I used the CH re-sizing Die Re-sized and opened the neck for .416 bullets. Still waiting on the chamber reamer for the barrel. I have some 300 grain Barnes Bullets coming. Will post additional progress as it develops. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia