Dies for a 300WSM/416

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/3381000511

13 August 2009, 19:33

larrys01

Dies for a 300WSM/416

We are re barreling a M70 in .300WSM to .416 Cal. Any ideas where we can get a set of Reloading Dies?

14 August 2009, 08:21

mr.pepper

check out www.ch4d.com they should have what your looking for.

''People should say what they mean and mean what they say. Life is too short to be lead down the wrong path.''

14 August 2009, 11:40

larrys01

Thanks, Will do.

14 August 2009, 16:12

jeffeosso

if its a straight neck out,... have a machinest buddy modify a set of 300wsm

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com

14 August 2009, 16:29

larrys01

We had planned on trying that, but now we have set coming from CH4D.

16 August 2009, 15:11

460wby

A friend of mine have a 300/458 made, but I dont know who did the job. I'll ask him.
He is in here sometimes, as "afterburner".

*Treat problems like a dog; Take a sniff ..... If it can't be killed, eaten, or fucked? Just pie on it, and walk on!:-)

Arild.

16 August 2009, 17:25

jeffeosso

Larry - trust me... bore out a set of 300 wsm dies, for a working set -- heat treat can wind up take several times longer than expect.

get a lyman set of wsm and rigby and "make a set" between them

18 August 2009, 02:02

larrys01

I have a set coming from CH 4D. Thanks guys.

22 August 2009, 18:59

larrys01

Received the Dies from CH-4D yesterday. They look good. I had taken some Barnes solids and turned one end down to about .338, .350, & .375
Using my RCBS .416 Collet in my Bullet Puller I opened the neck on some .300 wsm brass. Then I used the CH re-sizing Die Re-sized and opened the neck for .416 bullets. Still waiting on the chamber reamer for the barrel. I have some 300 grain Barnes Bullets coming. Will post additional progress as it develops.