THE ACCURATERELOADING.COM HUNTING FORUMS

Merry Christmas to our Accurate Reloading Members

Page 1 2 

Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Bullet for the .375H&H
 Login/Join
 
One of Us
posted Hide Post
quote:
Originally posted by Monastery-Forester:
Last year I used a 8,5x63 (something like a 338/06 Improoved)with a light, lead-less 140grs SAX-KJG -bullet with little over 3400fps with great success on Kudu, Oryx and Sprinbuck. Now I plan to use the same bullet - weight in .375 = 154grs- with a speed of 3700fps! I tested this bullet on red deer and wildboars.


I understand the desire to use something different, however I'm intrigued to know if you think the 8,5x63 Reb with say a 200g TSX would be insufficient for the game you are after this trip?

I have been meaning to get hold of an 8,5x63 barrel if one came up for the right price, hence my question.


Formerly Gun Barrel Ecologist
 
Posts: 324 | Location: Australia  | Registered: 04 May 2013Reply With Quote
one of us
Picture of Pa.Frank
posted Hide Post
I shot my oryx with a 30-06 at 250 yards with a Nosler 180 partition. One shot worked just fine. I took my kudu with my 375 but if I had to do it again, I'd just use my 06 for all plains game. Its plenty with the right bullet up to 300 yards.
But if your set on using your 375.. I like Winchester 760 powder (or H-414) and the Speer 285 gr bullet.. Its has been by far the most accurate bullet I have ever tried in mine..


NRA Benefactor.

Life is tough... It's even tougher when you're stupid... John Wayne
 
Posts: 1985 | Location: The Three Lower Counties (Delaware USA) | Registered: 13 September 2001Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
270 or 300 gr TTSX. No substitute. No equal.
 
Posts: 8537 | Registered: 09 January 2011Reply With Quote
One of Us
Picture of SIKA98K
posted Hide Post
Eland are in general an animal of the bush.
Your PH should be getting you in close and personal to shoot one of these.
I use Winchester 270gr factory loads in my 375. They shoot well in my rifle.
 
Posts: 458 | Location: Ireland | Registered: 12 May 2004Reply With Quote
One of Us
posted Hide Post
I'm a Swift A Frame fan for my 375 H&H. If I just took one rifle for everything it would be the 375. Ive used the 300 grain A-frame and have taken game out to 300 yds.


Tim

 
Posts: 592 | Registered: 18 April 2009Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia