Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | ![]() |
One of Us![]() |
Today I picked up a M77 RSI in 7-08, manufacture date should be about 1983, anyone have any info as to the rarity of this combination? Thanks, Muffin | ||
|
one of us |
Congrats on your new 7mm Rigby Short. ![]() Bet you like it... ![]() If yuro'e corseseyd and dsyelixc can you siltl raed oaky? | |||
|
one of us![]() |
The Ruger RSI in 7-08 is rare. NIB are selling on the auction sites for above 1K. At least that is what is being asked. I offered 850 for one and got nowhere. I have seen none in the 500-600 dollar range although the 308 and 243 go for that. | |||
|
one of us |
cowboy, saw one on crosnoeguns.com Ruger RSI 250/3000 NIB Bob | |||
|
one of us![]() |
Thanks for the info. 7-08 is the difficult one to find at that price. 308, 243 and others can be found. | |||
|
new member![]() |
Got one (M77 RSI)a few years ago in .270. used to spread shots about 4 inches a 100 yds. Finally got serious a few weeks ago and free floated the barrel and especially the end cap. I can now move the muzzle of the barrel slightly around the end cap with my finger which I must admit I found a little disconcerting at first. I cleaned the copper fouling and lapped the barrel. Went to the range to adjust the open sights. After some tweeking, I fired a 50 yard 4 shot group of less than 1/4 inch, with open sights! This should translate to sub MOA at 100 yards with a scope. I have now worked on the trigger. Went from 7 lbs to 3 lbs and no creep. I installed a setscrew in the receiver opposite the trigger to stop over travel, worked great. So it should shoot better now more than ever. By the way the range where I am at has closed their 100 yrd range because of a lawsuite so I am looking for another range to test my theory. ![]() | |||
|
Powered by Social Strata |
![]() | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia