Go | New | Find | Notify | Tools | Reply |
one of us |
Just made some Basic Belted brass from a 7mm Mag w/w case. Turned the belt off, the rebelted with .470 base diameter. Trimmed the belt and rebated the head on the ole South Bend! Now you can have two choices of head spacing. The chamber will run unbelted loads just fine! No need for the belt, other than nobody else has one! Get Close and Wack'em Hard | ||
|
One of Us |
I have been thinking about the imaginary belted 06 you made for years. I think I might have posted about it in the Whelen thread IIRC. With that case, you can do .452, .435, .429, .423, .416, 411 etcetera etcetera Bravo! Have you thought about belting the 10.75x68 case?
577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
I tried it to make some 444 Belted case, but the possibilities, like you have shown are very interesting. Now to shorten one to 2.320 and see if I can seat a bullet without bulging the case. Just made 6 more cases, just need to blow them out! Get Close and Wack'em Hard | |||
|
One of Us |
I like the idea of a belted 400 06 Imaging an 06 based gun that all you need is a clean up reamer to add the belt and neck/throat and keep the 06 taper without a shoulder. Rebore the 06 barrel. 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
A real 400-06 Straight Wall! Another Ohio Caliber! Get Close and Wack'em Hard | |||
|
One of Us |
I think it would be appropriate to name the case or line of cartridges I was thinking about it a little and I thought of BOS for belted ought six. I was thinking that the cartridge I described above would be appropriately named the 400 BOSS for belted ought six straight. Any thoughts? 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
I like the 400 BOS and 400 BOSS! Get Close and Wack'em Hard | |||
|
One of Us |
Of course the BOSS name can be applied to the larger diameter bullets like the 416, 423, 444 etc so you could have the whole BOSS line of cartridges for 400 on up. The 6.5 RPM case from Weatherby could be used to form these cases as well but probably expensive. There is a case manufacturer who could do this by the hundreds or thousands.
577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
one of us |
Did not know of the 6.5 RPM, another choice. How about a 375 Mag?.....very interesting looking case!
Get Close and Wack'em Hard | |||
|
One of Us |
The 6.5 RPM is an elongated 284 case IIRC and you could belt that one and not have to reduce the rim. 577 BME 3"500 KILL ALL 358 GREMLIN 404-375 *we band of 45-70ers* (Founder) Single Shot Shooters Society S.S.S.S. (Founder) | |||
|
One of Us |
There was a link on here a couple of years ago about a cartridge called the 411 Ryan. It is 240 Wby brass blown out. Because of the belt, this would make a pretty sweet 400 cartridge. 411 Ryan | |||
|
one of us |
Yes, that is like the 405B only shorter. I belt both the .470 diameter cases and the .453. Like the 240 Weatherby. I also want to shorten the brass a bit and make a 444B belted Marlin. Some thing just a bit tamer than a 400 Whelen!...in a short action. Talked with the Ryan guy a year ago or so. Nice fellow.
Get Close and Wack'em Hard | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia