One of Us
| Here you go...www.ballisticproducts.com
Have everything you need to make your own slug loads. Molds, hulls, slugs, etc.
Good luck. |
| | | Posts: 43 | Location: Chardon, Ohio | Registered: 18 October 2009 | 
IP
|
|
one of us
| please post if you find one. I'd like to have one too!! |
| | |
One of Us
| The Lyman molds for the 1-ounce slug sometimes are offered on eBay. The last one I saw went for $128. I use the Brenneke slug because I found them to be much more accurate than the Lyman slug in 16 gauge. I ran upon a Browning A-5 in 16 that someone had mutilated with a scope mount so I grabbed it and have been very pleased with its performance. I mounted a very old Stith Bear Cub 2 1/2X that has about a 3 minute dot which really takes the worry out of aiming. |
| | |
one of us
| wahoo,
the lyman design in 1oz is for 12ga. 10 ga slugs are 1 3/4 or 1 7/8 oz. besides being wrong diameter, they are too light for a 10ga. |
| | |
one of us
| thanks Rich! |
| | |
