Looking foe eiter a source for the slugs or a mold to make them.
Thanks
Bob

Here you go...www.ballisticproducts.com

Have everything you need to make your own slug loads. Molds, hulls, slugs, etc.

Good luck.

please post if you find one. I'd like to have one too!!

The Lyman molds for the 1-ounce slug sometimes are offered on eBay. The last one I saw went for $128. I use the Brenneke slug because I found them to be much more accurate than the Lyman slug in 16 gauge. I ran upon a Browning A-5 in 16 that someone had mutilated with a scope mount so I grabbed it and have been very pleased with its performance. I mounted a very old Stith Bear Cub 2 1/2X that has about a 3 minute dot which really takes the worry out of aiming.

wahoo,
the lyman design in 1oz is for 12ga. 10 ga slugs are 1 3/4 or 1 7/8 oz. besides being wrong diameter, they are too light for a 10ga.

www.neihandtools.com

Rich

thanks Rich!