Anyone with a good smith to rebore a 30-06 to a 9.3 - 64
Bill

Jim Dubell and Allen Baker at Delta Gun Shop/Clearwater reboring (formerly Labounty reboring)

http://www.deltagunshop.com/Clearwater/CW_services.html

They do great work and are awesome to work with. Attached are pictures of the low wall they are reboring and rechambering from .22 Hornet to 32-20. Color case hardening by Doug Turnbull.

) .

I've been through this in the past.
In most cases the screw holes that hold the rib on are too deep to allow for a reboar job.

Cant hurt to ask???

quote:

Originally posted by Akshooter:
I've been through this in the past.
In most cases the screw holes that hold the rib on are too deep to allow for a reboar job.

You can check that yourself. Just mic the barrel at that point and use a depth mic in the screw hole(s) & do the math. You really don't need much metal in the bottom of a hole up where the rib/sights are located. <1/16".