The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Single Shot Rifles cleaning rod guide for #1?Go | New | Find | Notify | Tools | Reply | |
| cleaning rod guide for #1? | Login/Join |
| One of Us |
Anyone have a source for these? Concerned abut Montana copper solvent getting in the action in the long run. I put together a #3 in 270 WSM and turned the guide on a friend's lathe, but he's assumed room temperature. A regular bolt action guide won't fit. Thanks jmbn Old and in the way | ||
|
One of Us |
Eric can make you a bore guide. Possum Hollow Products, Inc. 4086 East 300 North Peru, IN 46970 Phone: 1-260-377-9715 PossumHollowProducts.com Eric Sinclair eric@possumhollowproducts.com DR #2276, P-100 2021 | |||
|
| one of us |
bore out the primer pocket to the size (caliber) of a fired case..insert case then run the rod thru that.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
| One of Us |
Don't know if it would work but, maybe neck a .300 H&H case down to .270 and cut off the case head or something like that. Hip | |||
|
One of Us |
If you are spilling bore solvent into the action, you are using too much. I have owned 20 #1s and never had this problem. But if I was making one, I would put O rings on it. | |||
|
| one of us |
I use a fired case bore out the case head to rod size or larger with a hand drill, push the case in..when finished cleaning I close the action then eject the case, not rocket science. a damp only patch is recommended.. ON a bolt gun I drill out the case head glass in an arrow shaft cut to 12 inches, same would work on a number 1..drape a towel over the stock. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
| One of Us |
| |||
|
| one of us |
I have a 2 lb coffee can full of them for about every caliber, I cut the arrow shaft to about 6 to 12 inches drill primer pocket out for a snug fit then lightly glass the shaft to the case, can cut a slot in the arrow shaft to oil the patch is a good idea that's optional.. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Rifles Single Shot Rifles cleaning rod guide for #1?
Visit our on-line store for AR Memorabilia