Go | New | Find | Notify | Tools | Reply |
new member |
a friend has a ruger 25-06 lever action that is ported . its terrible to shoot =LOUD . is there any way to close the ports . ? can a new barrel be installed ? any solution ? | ||
|
one of us |
Ruger lever action? You mean a Ruger No1 single shot? Barrel can be cut off or replaced. Maybe Tig welded but then would need refinishing. As usual just my $.02 Paul K | |||
|
One of Us |
Ruger 25-06 Lever action; As stated, you might mean a #1; it has a lever but is a single shot. If you don't want the ports, cut them off and re-crown the barrel. Or if they are round, tap them for plugs. A sleeve could be soldered over them. Don't want to weld on the muzzle of a barrel. | |||
|
One of Us |
Cut it and buy a sound moderator. | |||
|
one of us |
Do you have a son in law? If so have him put his fingers on the ports like he was playing flute. That would quiet things down at least for one shot. Jim "Whensoever the General Government assumes undelegated powers, its acts are unauthoritative, void, and of no force." --Thomas Jefferson | |||
|
One of Us |
"Sound Moderator". If you mean anything that reduces the noise of a firearm, those are not legal in the US unless they are registered and all states do not allow them. Unlike Europe where they are not a bad thing; here they are looked upon as a very bad, and illegal, thing. | |||
|
one of us |
The silencer situation is not that bad. 38 states allow unlicensed civilians to own them. There is a $200 tax and it takes 6-8 months to get BATFE authorization to make or buy one, but in the last several years a few states have eased restrictions. Ranb ______________________________ In my opinion the best accessory to put on a rifle is a silencer. | |||
|
One of Us |
Not allowed here at all. | |||
|
One of Us |
You need to purchase the suppressor first. It is held by the seller until you get the tax stamp approved by the Feds. The suppressor seller sends in the paperwork after you provide prints, check and complete paperwork from local LEO. Approval comes back to the suppressor seller who then contacts you to deliver the suppressor. Yea, ask me how I know? NRA SCI & DSC 9.3x62 375 H&H 300 H&H 450 Nitro 3.25 | |||
|
One of Us |
Pound nails in the holes and file off the ends. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia