The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing best bluing?Go | New | Find | Notify | Tools | Reply | |
| best bluing? | Login/Join |
Moderator |
Who does the best high polish bluing? totally out of my normal area, as I prefer matte finishes. jeffe opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | ||
|
| One of Us |
Hard to say who is the best! But if I had something really important to do I would send it off to Turnbull. Not saying he is the best,just the best that I've seen since that old guy that use to polish for Micrro sight years ago gave it up. | |||
|
one of us |
D'Arcy Echols uses Half Moon Rifle Shop and I would imagine he's pretty picky. "Experience" is the only class you take where the exam comes before the lesson. | |||
|
| One of Us |
Rust blue it yourself. Great matte finish that way. Libertatis Aequilibritas | |||
|
one of us |
Jeffe, there's a guy named Randy Fite over in Richards, TX not far from you who I hear good things about, mainly builds Remington sendero & tactical rifles. Haven't used him but you might go visit him. Also a fellow named Peter Peiper in Hempstead who is supposed to be good. Sorry, don't have their phone numbers. Forrest A. NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS. Shoot & hunt with vintage classics. | |||
|
one of us |
I used these guy's before HOT FLASH. I got their Master finish (Very Shinny) on a Remington 700. It turned very nice. No visible dips or buffing marks. I don't know if the picture will convey the finish, but it turned out nice. I'll use them again if needed. Terry   -------------------------------------------- Well, other than that Mrs. Lincoln, how was the play? | |||
|
| one of us |
TC1, that's nice work, I'll file their website. I actually like a fine hot blue finish as well as rust blue. NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS. Shoot & hunt with vintage classics. | |||
|
One of Us |
HOT FLASH reparkerized an old M1 I traded for. they did a very nice job and their prices were resonable. Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
| one of us |
Hey Jeffe, I ended up sending my Whitworth to a guy in Canyon Lake who cut and crowned and was able to fit the PME safety to me. He is a blueing specialist and does all the work for KDF and some other custom smiths. He's Tip Burns, 830-935-3338. His turn around time was very good for me. Lets see if we can get some big bore shooters together before too long. Bob | |||
|
| One of Us |
I've been happy very with HOT FLASH's work. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia