THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Question
 Login/Join
 
470Evans
One of Us
Picture of 470Evans
posted
I ask the same question in the big bore forum...

Would a take off barrel from a RH model 70 in 416 fit a LH action from a 375 H&H?


2010 Sapi Elephant Hunt
 
Posts: 1312 | Location: Texas | Registered: 29 August 2006Reply With Quote
Westpac
One of Us
Picture of Westpac
posted Hide Post
Assuming both are Mod 70's and push feeds. Extractor cut is on opposite sides on the CRF's.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
olcrip
One of Us
Picture of olcrip
posted Hide Post
quote:
Originally posted by Westpac:
Assuming both are Mod 70's and push feeds. Extractor cut is on opposite sides on the CRF's.


You could also set it back 1/2 a turn and clean up the chamber and head space it again. Then remount your sights at 180 degrees.


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!
 
Posts: 1800 | Location: River City, USA. East of the Mississippi | Registered: 10 February 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia