The Accurate Reloading Forums
Question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/973100707

29 July 2007, 20:49
470Evans
Question
I ask the same question in the big bore forum...

Would a take off barrel from a RH model 70 in 416 fit a LH action from a 375 H&H?


2010 Sapi Elephant Hunt
29 July 2007, 20:53
Westpac
Assuming both are Mod 70's and push feeds. Extractor cut is on opposite sides on the CRF's.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
30 July 2007, 00:58
olcrip
quote:
Originally posted by Westpac:
Assuming both are Mod 70's and push feeds. Extractor cut is on opposite sides on the CRF's.


You could also set it back 1/2 a turn and clean up the chamber and head space it again. Then remount your sights at 180 degrees.


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!