THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Ruger 10/22 foresight removal
 Login/Join
 
One of Us
posted
I have a Ruger 10/22 with a broken foresight. I have the replacement sight, but now I can't figure out which side the old sight drives out on. Do I tap out left to right, right to left or have I got it all wrong? Should I use heat? It seems really in there solid and I don't wanna twist the bbl or base.

Anybody know?
 
Posts: 36231 | Location: Laughing so hard I can barely type.  | Registered: 21 April 2001Reply With Quote
<JBelk>
posted
Drive it out from right to left and install the new one left to right.

Firearms dovetails used to be fitted with a taper. That ended about WW-II but it's still a good idea to follow the convention.

A front sight pusher makes the job stress free on you and the gun. When you dont have one use a brass punch and hold the barrel in the vice as close as you can to the dovetail.
 
Reply With Quote
One of Us
posted Hide Post
Next time Bruce don't use your rifle barrel as a jack handle. Use the one that came with your car. [Smile]
 
Posts: 19677 | Location: New Mexico | Registered: 23 May 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Pecos45:
Next time Bruce don't use your rifle barrel as a jack handle. Use the one that came with your car. [Smile]

Takes tires off. U never heard of "jack off?" [Big Grin]
 
Posts: 36231 | Location: Laughing so hard I can barely type.  | Registered: 21 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia