THE ACCURATERELOADING.COM GUNSMITHING FORUM

Page 1 2 

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
jewel bolt or not? pics please
 Login/Join
 
One of Us
Picture of Mike_Dettorre
posted
please post pics of custom rifles with and without jeweled bolts...thanks


Mike

Legistine actu? Quid scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10160 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Mike,
Jeweled or polished is purely a matter of personal preference.....there is actually very little to no functional advantage in jeweling even though is is claimed that it holds a bit of oil for lube.



as I said.....some things just look nice without jeweling:


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
please post pics of custom rifles with and without jeweled bolts...thanks



Oh brother... Big Grin


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
one of us
Picture of dempsey
posted Hide Post
Nice bolt-ons.


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
WELL???????.....if you had "guns" like that, would you want them jeweled!?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
jumping

Some jewels are just better than others...




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
One of Us
posted Hide Post
Girls look better without implants.

Jeweling guns for men is a waste of time.
 
Posts: 9043 | Location: on the rock | Registered: 16 July 2005Reply With Quote
One of Us
Picture of gunmaker
posted Hide Post
An old G&H 30-06 from a matched pair.



gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1862 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
One of Us
posted Hide Post
Another route to go is have the bolt spiral fluted. I just did on a sheep rifle that Jim Kobe made me. Cost was about $75.
Don't believe that it adds anything functionally, but it looks nice to some people and gives a custom look.
Nice racks above.


NRA Patron member
 
Posts: 2652 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
VANODOG How long have you been setting on that picture, just to spring it on us! clap Anyway, i like the jeweled bolt on a pure custom rifle, it doesnt belong on a stainless, with a plastic stock.??? Just my way of thinking!!!


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
Like vapodog said, it's a matter of personal preference. I prefer custom guns that whisper, not shout, so my preference is for a nice polished bolt without jeweling. If the rest of the rifle is done nicely, it shouldn't need jeweling to say "custom".

I think jeweling is sometimes used to catch your eye so that you don't notice how crappy the rest of the rifle looks.


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by ForrestB:
I think jeweling is sometimes used to catch your eye so that you don't notice how crappy the rest of the rifle looks.


Gotta be some truth in that. Some of my most productive fishing/trolling lures were jewelled.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
One of Us
posted Hide Post
Isn't it tough being on the same forum as ForrestB?

Once again, he's stated my position, but... a little better thought out, and... better expressed.

The guy's almost infallible.

LOL.

flaco
 
Posts: 674 | Registered: 31 January 2005Reply With Quote
One of Us
Picture of Bent Fossdal
posted Hide Post
The thing is, that jeweling can look decent when it is new. After some wera and use, in my book a jeweled bolt looks worse than a polished one.
And i want my customers to be pleased even after 100 rounds.


Bent Fossdal
Reiso
5685 Uggdal
Norway

 
Posts: 1707 | Location: Norway | Registered: 21 April 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
I think jeweling is sometimes used to catch your eye so that you don't notice how crappy the rest of the rifle looks.

I would not debate the merit of this statement, however, such smiths as Echols and Burgess offer the service to their rifles.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
This is a question, not a comment. I have had more than one occasion where jeweling a follower improved feeding and why wouldn't jeweling the bolt do the same for bolt drag? You are reducing the contact area by a substantiual amount. Maybe this was once upon a time the quick way to slick up a bolt?

Another reason I ask is because if it were purely about BLING, why wouldn't the tacky and tasteless be jeweling entire recievers? Or at least floorplates, trigger guards, barrels, and/or other accessories? Curious minds want to know!


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
quote:
Originally posted by vapodog:
I would not debate the merit of this statement, however, such smiths as Echols and Burgess offer the service to their rifles.


I think you'll find "most" gunsmiths/builders offer the service if the customer want's it.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
quote:
I think jeweling is sometimes used to catch your eye so that you don't notice how crappy the rest of the rifle looks.

I would not debate the merit of this statement, however, such smiths as Echols and Burgess offer the service to their rifles.


The operative word being SOMETIMES. Obviously not when Burgess or Echols make them.
 
Posts: 583 | Registered: 28 May 2007Reply With Quote
one of us
posted Hide Post
I have a Win 70 featherweight that was jeweled when new. After some use, like Bent says, it's not jeweled now. It would look better polished.
 
Posts: 279 | Registered: 31 May 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Marc:
I have a Win 70 featherweight that was jeweled when new. After some use, like Bent says, it's not jeweled now. It would look better polished.

Yup and I have rejeweled them and they look nice again.

I also have an old Remington that originally had a polished bolt and that bolt burnishes a new pattern every few years.....I just repolish it and it looks nice again.

For sure it's a lot easier to repolish than rejewel but then again....it's what trips one's trigger.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
quote:
Originally posted by vapodog:
...but then again....it's what trips one's trigger.

Not exactly. Everyone needs to get onboard with whatever I say about things. Smiler


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ForrestB:
quote:
Originally posted by vapodog:
...but then again....it's what trips one's trigger.

Not exactly. Everyone needs to get onboard with whatever I say about things. Smiler


I like jeweled bolts... beer




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
one of us
posted Hide Post
quote:
Girls look better without implants.


I'll second that thought. I never did like the feel of a set of boob that felt like an overinflated toy ballon. thumbdown
Paul B.
 
Posts: 2814 | Location: Tucson AZ USA | Registered: 11 May 2001Reply With Quote
One of Us
posted Hide Post
It's a matter of taste, of course...a jeweled bolt has no real function that I can see...merely
decorative & kinda nice...but along with the other's comments...when the jeweled wears it looks worse than if it had never been done.
I wouldn't bother doing it. I had a worn jeweled bolt on a quality rifle, and when it got worn ...
just had it highly polished.
Best Regards,
Tom
 
Posts: 287 | Location: Cody, Wyoming | Registered: 02 July 2006Reply With Quote
One of Us
Picture of RenegadeRN
posted Hide Post
I will third the belief about inflated chests...however, Vapodog? If you are able to put even one of those on my bolt...I WILL send ALL my bolts to you!


'I pledge allegiance to the flag of the United States of America and to the republic for which it stands, one nation under God, indivisable, with liberty and justice for all.'
 
Posts: 171 | Location: Eastern North Carolina | Registered: 29 March 2007Reply With Quote
One of Us
Picture of srtrax
posted Hide Post
O.K. lets keep the trigger pulled, in that case why have the stock checkered, i've never had one squirt out of my hands because it didnt have any, and we should not get into engraving. Its what you want, and what makes us all diffrent.


_____________________
Steve Traxson

 
Posts: 1641 | Location: Green Country Oklahoma | Registered: 03 August 2007Reply With Quote
one of us
posted Hide Post
Not all bolts are perfect. Some have heavy tool marks, file marks from deburring, undercuts and cutter mismatches. To polish all those things out would often leave you with a wavy hideous surface.
Jeweling can breakup the surface appearance enough to keep the little defects from jumping out at you like a tattoo. Otherwise they can be blued to hide the hickeys.
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
One of Us
Picture of richj
posted Hide Post
Frosted.

 
Posts: 6512 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
one of us
Picture of dempsey
posted Hide Post
rich, I really like that, can you explain the process?


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by dempsey:
rich, I really like that, can you explain the process?

I reminds me of the scraping of the ways and tables of a Bridgeport and other machine tools.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of richj
posted Hide Post
dempsey

My 'smith did it.. It looks like a spear point abrasive point is used.

Rich


quote:
Originally posted by dempsey:
rich, I really like that, can you explain the process?
 
Posts: 6512 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
Picture of Aspen Hill Adventures
posted Hide Post
Vapo's work (on my rifle):



~Ann





 
Posts: 19594 | Location: The LOST Nation | Registered: 27 March 2001Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Ann had much of her Whitworth customized by NECG and I felt honored to be asked to do the jeweling.....it's such a beautiful rifle....very simple and elegant in that simplicity.

Well done Ann!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
Vapodog, like I said before...

You do some great work!

Good job guy!!!
 
Posts: 3430 | Registered: 24 February 2007Reply With Quote
one of us
Picture of dempsey
posted Hide Post
I don't really buy the argument jeweling is an attempt to cover up other sub par work on the rifle, there are a couple suberb rifles is SDH's book that have jeweled bolts. I just don't like any embellishment that draws ones attention away from the rifle as a whole. That includes over the top engraving and complex checkering patterns. I suppose I prefer rifles that others might find plain.


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by richj:
Frosted.



I don't know about that "frosting" but I sure do like that bolt knob checkering. who is the Smith that did it. Nice.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
One of Us
posted Hide Post
RE: RichJ's bolt, I think JBelk called that "worm tracks."

I personally like it much more than jewelling. He had a picture of such a bolt in a very nicely done classic rifle, and it was nice.

T
 
Posts: 341 | Location: MI | Registered: 24 January 2005Reply With Quote
one of us
posted Hide Post
Some of the Griffin and Howe Mauser sporters also had a worm track patten. Similar to the above but not a busy, a simple line pattern. There are examples in Speeds Mauser Originals.
 
Posts: 475 | Registered: 16 December 2003Reply With Quote
One of Us
Picture of richj
posted Hide Post
Makes sense, he was a Griffin guy. George Beitzinger in NYC.

P64 M70 - 458 Lott - Adams engraving.


quote:
Originally posted by manhasset:
Some of the Griffin and Howe Mauser sporters also had a worm track patten. Similar to the above but not a busy, a simple line pattern. There are examples in Speeds Mauser Originals.
 
Posts: 6512 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
one of us
posted Hide Post
richj,

is Geo. Beitzinger the gunsmith who works out of Chapel Sports (sp.?) in Richmond Hill, Queens ?
 
Posts: 475 | Registered: 16 December 2003Reply With Quote
  Powered by Social Strata Page 1 2  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia