THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Need 3-position saftey for Springfield
 Login/Join
 
one of us
Picture of Toomany Tools
posted
I posted this in the Classifieds as well. I'm looking for a Springfield 3-position safety. I talked to Ed LaPour and he won't have any until sometime next year. Anyone have one they are willing to part with?

Thanks,


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
I hear, but can't confirm from my experience, that a post 64 model 70 3 position safety fits...

if you find two, let me know
jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39923 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
James Wisner makes replacement M-70 parts..don't know if they will sell for your conversion, but worth a phone call
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
John,

You have email.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Thanks, Malm. Email replied to.


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
Picture of Scrollcutter
posted Hide Post
Ed Lapour took over Wisner's 3 position safeties.

Don't hae the addy handy, but he lives in Bremerton, WA.


Roger Kehr
Kehr Engraving Company
(360)456-0831
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
Roger,

Thanks. I talked to him this morning and he won't have any until next year, but Malm helped me find one.

Thanks again to all,


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
Picture of Scrollcutter
posted Hide Post
Don't know Malm, but I've seen his posts. Seems like one of the more knowledgable chaps in Gunsmithing forum. Glad to hear he's helpful, as well. :-)


Roger Kehr
Kehr Engraving Company
(360)456-0831
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
One of Us
Picture of Westpac
posted Hide Post
Credit goes to my old buddy Rick0311. He seen that John was looking for one and let me know that he had one. thumb


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia