THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Ruger replacement pad
 Login/Join
 
One of Us
posted
Will soon have a Ruger 416 build in the process and the original stock is that gray laminate wood with the thin hard pad.
Would like to replace the pad with a slightly longer, softer one and was wondering if any of the bigger companies sold a replacement pad that fits without grinding?


My biggest fear is when I die my wife will sell my guns for what I told her they cost.
 
Posts: 6653 | Location: Wasilla, Alaska | Registered: 22 February 2005Reply With Quote
One of Us
posted Hide Post
Pachmayr shows a pre-fit Deccelerator for some of the Rugers.
http://www.pachmayr.com/prefit-pads.php

I've never used a pre-fit and am curious how close they are out of the box.
 
Posts: 714 | Location: Milwaukee, Wisconsin | Registered: 09 October 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
limbsaver does, but the sides are ugly unless ground


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40016 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Snowwolfe:
Will soon have a Ruger 416 build in the process and the original stock is that gray laminate wood with the thin hard pad.
Would like to replace the pad with a slightly longer, softer one and was wondering if any of the bigger companies sold a replacement pad that fits without grinding?


Randy if you want to keep the same LOP and have a decent recoil pad you have to shorten stock aprox 1/2 inch. Which makes the replacment pad to large. Need to do that on my Ruger also.


kk alaska
 
Posts: 950 | Registered: 06 February 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia