THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
SMALL Recoil Pad
 Login/Join
 
Clemson
one of us
posted
I'm fixing up a gun for a gentleman with dwarfism. The length of pull is shortened so much that I need a VERY small recoil pad. Are there any pads out there that I can grind down without running into a metal insert? The pad dimensions will be about 3 5/8 by 1 5/16.

Bill Jacobs


NRA Endowment Member
US Army Veteran
CWP Holder
Gunsmith
 
Posts: 339 | Location: Greenwood, SC | Registered: 06 February 2004Reply With Quote
Mike Scott
one of us
posted Hide Post
You might check Kick-Eez. I'm pretty sure they do not have a metal insert.
 
Posts: 819 | Location: Missouri | Registered: 24 May 2002Reply With Quote
Lord Frith
One of Us
posted Hide Post
quote:
Originally posted by Clemson:
I'm fixing up a gun for a gentleman with dwarfism. The length of pull is shortened so much that I need a VERY small recoil pad. Are there any pads out there that I can grind down without running into a metal insert? The pad dimensions will be about 3 5/8 by 1 5/16.

Bill Jacobs


Conneticut Shotgun has Silvers and others, red, brown, I think, with no metal.
Stephen
 
Posts: 538 | Location: Pacific Northwet | Registered: 14 August 2010Reply With Quote
Clemson
one of us
posted Hide Post
I had originally intended to use a Silvers pad, but the screw spacing on that one is too wide. I may be able to fit a flat plastic buttplate on it instead of a pad.


NRA Endowment Member
US Army Veteran
CWP Holder
Gunsmith
 
Posts: 339 | Location: Greenwood, SC | Registered: 06 February 2004Reply With Quote
Kyler Hamann
one of us
Picture of Kyler Hamann
posted Hide Post
Hogue is another option.


___________________________
www.boaring.com
_____
 
Posts: 2520 | Location: Central Coast of CA | Registered: 10 January 2002Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
Cut one from a "anti fatigue" matt?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40234 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Labman
One of Us
Picture of Labman
posted Hide Post
quote:
Cut one from a "anti fatigue" matt?


Or from a pair of flip flops


Tom Z

NRA Life Member
 
Posts: 2347 | Location: Pennsylvania | Registered: 07 January 2005Reply With Quote
matt salm
one of us
posted Hide Post
Hougue does not have the metal spacer.


Shoot straight, shoot often.
Matt
 
Posts: 1190 | Location: Wisconsin | Registered: 19 July 2001Reply With Quote
Atkinson
one of us
posted Hide Post
NOt sure but I think only Pachmyer has a metal insert??? another option is a Neidner checkered steel butt plate and matching grip cap is needed..The look nice..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42320 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
z1r
one of us
Picture of z1r
posted Hide Post
The Pachmayr Old English Youth pad is the same size as their small, but it lacks the metal insert.




Aut vincere aut mori
 
Posts: 4869 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
georgeld
One of Us
posted Hide Post
What's the caliber?

George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
 
Posts: 6083 | Location: Pueblo, CO | Registered: 31 January 2006Reply With Quote
Clemson
one of us
posted Hide Post
20 gauge


NRA Endowment Member
US Army Veteran
CWP Holder
Gunsmith
 
Posts: 339 | Location: Greenwood, SC | Registered: 06 February 2004Reply With Quote
loud-n-boomer
one of us
Picture of loud-n-boomer
posted Hide Post
Kick-Eez should work. I had one on a gun for my daughter when she was 12 that was ground down to about 20% smaller than a conventional small.


One morning I shot an elephant in my pajamas. How he got into my pajamas I'll never know. - Groucho Marx
 
Posts: 3866 | Location: Eastern Slope, Colorado, USA | Registered: 01 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia