THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
cheekpiece transition
 Login/Join
 
One of Us
Picture of richj
posted
I have something here, not sure what yet

 
Posts: 6528 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
I like french curves
https://www.amazon.com/TecUnit...m%2Caps%2C150&sr=8-5

i could probably go on about how they are Fibonacci sequences, but i just like the curves


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40101 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of richj
posted Hide Post
I actually have those.
 
Posts: 6528 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
Picture of richj
posted Hide Post
sand sand sand

 
Posts: 6528 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
Now add a shadow line.

What is that wood? Looks like madrone I had cut many years ago?


ACGG Life Member, since 1985
 
Posts: 1845 | Registered: 07 February 2005Reply With Quote
One of Us
Picture of richj
posted Hide Post
stock is from a Charles Daly (zastava) mini-mauser.

this thread

https://forums.accuratereloadi...9411043/m/9041071672
 
Posts: 6528 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
Still needs a shadow line surrounding the base of the cove moulding. Each end should disappear at the point.
R.G. Owen stock from the 50's

SDH stock from the 20's


ACGG Life Member, since 1985
 
Posts: 1845 | Registered: 07 February 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I like them to have a smooth curve from the CP into the stock; NO shadow like; those look awkward to me.
In fact, I can do without any cheekpiece at all, but I remove the shadow step from any stock I get/make.
 
Posts: 17395 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by dpcd:
I like them to have a smooth curve from the CP into the stock; NO shadow like; those look awkward to me.
In fact, I can do without any cheekpiece at all, but I remove the shadow step from any stock I get/make.

Well, it certainly is easier to eliminate details. I think a shadowline, when well designed and accomplished adds character to a custom stock. JMHO


ACGG Life Member, since 1985
 
Posts: 1845 | Registered: 07 February 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I just don't like the look of it. I actually removed that detail from my patterns too. I like a smooth transition from CP to stock. No steps.
 
Posts: 17395 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of richj
posted Hide Post
I'm not sure I want to go that far. I have another mini-stock I may try it on.
 
Posts: 6528 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia