one of us
| I was thinking along those lines too, but does the Timney come with a new safety?
thanks,
Rob |
| Posts: 1693 | Location: East Coast | Registered: 06 January 2003 |
IP
|
|
one of us
| I work at a Remington authorized service center. We are replacing triggers in older X-Mark models and recently older Walker triggers. The lawsuit was finally settled. Walker trigger guns get a standard non-adjustable X-Mark Pro trigger. The lowest pull we are allowed to release is 4 lb. 0 oz. Older X-Mark guns either get an adjustable or a non-adjustable depending on what they were originally equipped with. The adjustable ones (with the screw in the trigger bow) can be set set down to 3.5 lbs 0 oz. but the adjustment screw is run in until it registers between 4 to 5 lbs 0 oz. The non-user adjustable ones are set no lower than 4 lb 0 oz. |
| |
one of us
| Thank you Bob for clarifying. Does Remington cover shipping? i seem to remember they were sending out boxes at one time in preparation for this, is that still part of the settlement? |
| Posts: 1693 | Location: East Coast | Registered: 06 January 2003 |
IP
|
|
one of us
| The ones covered by the recall and the Walker Lawsuit come in shipping pre-paid. Remington will send you a box and a shipping label. |
| |
one of us
| Thank you. |
| Posts: 1693 | Location: East Coast | Registered: 06 January 2003 |
IP
|
|
One of Us
| Replace the trigger groups with a Trigger Tech.com You'll throw any Timney in the trash to get that POS out of circulation. |
| Posts: 430 | Location: Fairbanks,AK. | Registered: 30 October 2008 |
IP
|
|