THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Trigger bow differences
 Login/Join
 
one of us
posted
What are differences between Mil trigger bow & Oberndorf trigger bow?

Not the whole bottom metal assembly just the bow.

Other than the floor plate release in the Oberndorf bow.

Is the shape the same?

Could a Mil bow be grafted onto a bottom metal assembly?

To have an Oberndorf bow shape on a current mfg bottom metal.

Or would one have to find an Oberndorf bottom metal to graft on
to it?

Cheers, Allen


It's a Mauser thing, you wouldn't understand.
 
Posts: 656 | Location: North of Prescott AZ | Registered: 25 October 2004Reply With Quote
One of Us
posted Hide Post
The question is not precise enough.
There are countless mil Oberndorf made trigger bows.
I guess you have the commercial Oberndorf bottom metal in mind.

There are many commercial Oberndorf made Mauser rifles ( especially early ones , but a few produced in the thirties/Type A rifles ) provided with a trigger bow geometry that is found on military bottom metal.
Then there are the most often found commercial rifles with the larger bow in two configurations(one with the lever release and the other with the button in the trigger bow).
Both types with or without double set triggers.

The large trigger bow has an advantage over the small one , because it is easier to install and use a DST and wearing gloves.
Interestingly all the copies of Mauser bottom metal made after the war have the small bow contour of the Argentine military bottom metal with the exception of the magnum actions (at least the German productions and a few Americans.

So if you want to have the larger bow configuration you can forget "grafting" .
In the case you have a large bow you must have an commercial Oberndorf magazine box and grafting is no longer needed.

Maybe that someday, someone in the aftermarket scene will produce a real copy of the commercial
Oberndorf magazine box.
Let me know , when you hear of it .I would by a few. dancing
 
Posts: 230 | Location: Germany | Registered: 02 December 2009Reply With Quote
one of us
posted Hide Post
Yes I should clarify, not large Oberndorf, but small Oberndorf,
as in the general shape of the PreWar Rigbys.

I was thinking the 1909 is more rounded than the ones
usually used on the Rigbys.

Cheers, Allen


It's a Mauser thing, you wouldn't understand.
 
Posts: 656 | Location: North of Prescott AZ | Registered: 25 October 2004Reply With Quote
one of us
posted Hide Post
Pictures?
 
Posts: 1366 | Location: Houston, TX | Registered: 10 February 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by heavenknows:
The question is not precise enough.
There are countless mil Oberndorf made trigger bows.
I guess you have the commercial Oberndorf bottom metal in mind.

There are many commercial Oberndorf made Mauser rifles ( especially early ones , but a few produced in the thirties/Type A rifles ) provided with a trigger bow geometry that is found on military bottom metal.
Then there are the most often found commercial rifles with the larger bow in two configurations(one with the lever release and the other with the button in the trigger bow).
Both types with or without double set triggers.
T
The large trigger bow has an advantage over the small one , because it is easier to install and use a DST and wearing gloves.
Interestingly all the copies of Mauser bottom metal made after the war have the small bow contour of the Argentine military bottom metal with the exception of the magnum actions (at least the German productions and a few Americans.

So if you want to have the larger bow configuration you can forget "grafting" .
In the case you have a large bow you must have an commercial Oberndorf magazine box and grafting is no longer needed.

Maybe that someday, someone in the aftermarket scene will produce a real copy of the commercial
Oberndorf magazine box.
Let me know , when you hear of it .I would by a few. dancing


PME/James Wisner used to make them. Wish he still did. They were very nice. I like Wiebe's stuff a lot, but no Oberndorf guard bows, and until folks start beating down his door with cash in hand, he probably won't ever make any.


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3307 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by heavenknows:
The question is not precise enough.
There are countless mil Oberndorf made trigger bows.
I guess you have the commercial Oberndorf bottom metal in mind.

There are many commercial Oberndorf made Mauser rifles ( especially early ones , but a few produced in the thirties/Type A rifles ) provided with a trigger bow geometry that is found on military bottom metal.
Then there are the most often found commercial rifles with the larger bow in two configurations(one with the lever release and the other with the button in the trigger bow).
Both types with or without double set triggers.

The large trigger bow has an advantage over the small one , because it is easier to install and use a DST and wearing gloves.
Interestingly all the copies of Mauser bottom metal made after the war have the small bow contour of the Argentine military bottom metal with the exception of the magnum actions (at least the German productions and a few Americans.

So if you want to have the larger bow configuration you can forget "grafting" .
In the case you have a large bow you must have an commercial Oberndorf magazine box and grafting is no longer needed.

Maybe that someday, someone in the aftermarket scene will produce a real copy of the commercial
Oberndorf magazine box.
Let me know , when you hear of it .I would by a few. dancing


With a proper sample and milnimum order of 30 units.....you got lt!
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
one of us
posted Hide Post
Hey, Duane, if we provided you a proper sample...

Could you make a run of Oberndorf Trigger bows to
retrofit to you bottom metal?
Ie... guys that have your bottom metal but would
graft on your new Oberndorf bow.

I think we all would want it straight off the CNC
machine so they could be sculpted after installing.
So there wouldn't be any hand finishing on your
end at least.


If so how many would you need for a run of them &
ball park price?

Depending on price some of us might buy more than needed
at the moment just to help make it doable

Matt said he would take two I would take at least one.

Cheers, Allen


It's a Mauser thing, you wouldn't understand.
 
Posts: 656 | Location: North of Prescott AZ | Registered: 25 October 2004Reply With Quote
one of us
posted Hide Post
Anyone have a pic of the Blackburn Oberndorf bow?

Also how does it compare to an Oberndorf bow, similar
or real close or in name only?

Cheers, Allen


It's a Mauser thing, you wouldn't understand.
 
Posts: 656 | Location: North of Prescott AZ | Registered: 25 October 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia