THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Carcano Side Mount Scope
 Login/Join
 
One of Us
posted
Hey folks, I talked my dad out of this 15-20 years ago, but he has it on the brain again.
He is wanting to put a vintage scope onto a Carcano.

That said, the only side mount I can find is a Weaver No.1, and the setup will put the scope over top the action.

That will not work, as the Carcanos are enblock fed from the top.

Any scope mount needs to be offset left of the action.

1. Anybody have one of the old vintage 3/4" side mounts for the Carcano they want to sell?
2. I was curious if maybe the weaver No. 1 base could be modified so the scope oriented more straight up from the side of the receiver?
3. I was wondering if maybe on of the Weaver "N" mounts might work with a little modification?

Thoughts & ideas?

Cheers!
 
Posts: 168 | Location: Iowa | Registered: 04 January 2005Reply With Quote
One of Us
Picture of yumastepside
posted Hide Post
Not sure if this helps, but I found this pic online, don't know which brand it is....





Roger
 
Posts: 1048 | Location: Was NSW, now Tas Australia | Registered: 27 June 2009Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
That is a Pachmyer side swing mount, and if can find that, or a Weaver swing mount, those will work, as will any side mount like a G&H, and others. Wouldn't be hard at all to machine a side base for Weaver bases either. NECG should have EAW, which will cost ten times what the rifle is worth, but will work fine. Lots of options.
Ebay.
 
Posts: 17364 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
What did Oswald have on his?


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1513 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Side mount; Weaver type stamped sheet metal, fixed; not centered over the bore. You could just order them directly from Kleins in Chicago for $12.99 and with the cheap 3/4 inch scope; $18.99. I used to study those ads....
 
Posts: 17364 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I can get you part way there.
Weaver side mount base 48401 (#1). Proper Weaver base for Carcano. You'll have to drill and tap receiver and find a set of Weaver side-mount rings.
PM me you address if you want it.
 
Posts: 313 | Location: Alaska to Kalispell MT | Registered: 06 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia