The Accurate Reloading Forums
Rechamber???

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/826103772

04 June 2005, 01:08
billhilly66
Rechamber???
I got a barrel from a guy that was originally chambered for 7-08 but for some reason, he rechambered it for 7x57 except that the 7-08 is a larger diameter that the 7x57. What should I do with it? Will a 280 work or do I need to go to a 7 mag to get past the 7-08 diameter?


Libertatis Aequilibritas
04 June 2005, 01:48
vapodog
You have two choices.....7MM Mag or if you like...the Ackley Improved version of the 7 X 57 or the .280


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
04 June 2005, 03:36
jeffeosso
depends on the barrel...
should be set back and rechambered for whatever you like.. the 280 will not clean it up as is

setback and rechamber should be far cheaper than rebarrel or converting to a mag

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
04 June 2005, 19:02
Jim Kobe
Just a thought but would the 284 Win clean up with a bit of shortening?


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

04 June 2005, 20:37
El Deguello
quote:
Originally posted by Jim Kobe:
Just a thought but would the 284 Win clean up with a bit of shortening?


Yes, BUT it would require quite a bit of shortening. I believe the .284 would have been the best choice originally, to increase the power of the 7mm/08 a little....


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
04 June 2005, 20:47
vapodog
quote:
Originally posted by El Deguello:
quote:
Originally posted by Jim Kobe:
Just a thought but would the 284 Win clean up with a bit of shortening?


Yes, BUT it would require quite a bit of shortening. I believe the .284 would have been the best choice originally, to increase the power of the 7mm/08 a little....


Mr Kobe's idea to go to the .284 Win is truly excellent and the amount of shortening is one thread with a 16 pitch thread.

Where is the unusual amount of shortening comeing from?....Am I missing something?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill