THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Winchester receiver screws-sockethead stainless?
 Login/Join
 
One of Us
posted
Where can I find Winchester replacement stainless button head with hex. capscrews. I think you understand as I don't know the correct terminology. Thanks Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of M1Tanker
posted Hide Post
I called Winchester Customeer Service parts dept to get mine. Brownells list a set but they no longer carry them.


William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.
 
Posts: 3156 | Location: Rigby, ID | Registered: 20 March 2004Reply With Quote
One of Us
posted Hide Post
Thank you Mr. M1Tanker, I will call them Monday. I haven't put a thread guage on them, are they 1/4"-32? Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
posted Hide Post
Mr. Rick, I guess that I can't manuever through their website. I can't find the oval head countersunk socket head capscrews in stainless. Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Okay,

Then go to Brownell’s and punch in part # 910-491-220 and see what comes up.

These are not the ones pictured in their catalog but are direct Winchester replacements listed in the back of the catalog.

I punched it in and hit the buy button and it showed up in my shopping cart. If the item is out of stock or no longer available you normally get a message informing you of that.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
posted Hide Post
Thanks Rick. Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
Brownells has them in socket head stainless, I believe they are B-Square
 
Posts: 234 | Location: tx | Registered: 30 September 2003Reply With Quote
One of Us
posted Hide Post
I called Brownells and they have discontinued them. Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by butchlambert:
I called Brownells and they have discontinued them. Butch


Butch,

Brownells had the ones I told you about, didn’t they?
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
posted Hide Post
Rick, they said that they no longer had them. Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Butch,

That part came up on their web site as a good number???????

Try Matt Williams...he makes their bottom metal and would probably be able to get you some screws.

Midway also has them listed.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
one of us
posted Hide Post
Brownell's shows 084-273-005 in a stainless for the model 70, only thing for some reason it comes with a phillips head while the Rem 700 come with a hex opening....
 
Posts: 234 | Location: tx | Registered: 30 September 2003Reply With Quote
One of Us
posted Hide Post
srt,

If you go to the back of Brownell’s catalog you will find a listing of factory parts that they carry. That’s where I found the stainless hexhead guard screws from Winchester.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
one of us
Picture of fireball168
posted Hide Post
Except none of them are in stock at Brownells...
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
one of us
Picture of fireball168
posted Hide Post
Calling Winchester Parts Dept. now 800-322-4626


U354912890
U354912900
U354912910

Those three should cover it...stainless hex head.
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
one of us
Picture of fireball168
posted Hide Post
Two are on backorder, but expected in soon...
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
One of Us
posted Hide Post
Mr. Fireball, I just hate paying $5 ea. for them. Are the threads 1/4"x32? Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
One of Us
posted Hide Post
Butch,

So now you’re gonna go cheap on us, huh! Smiler
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
one of us
Picture of fireball168
posted Hide Post
Yes, they are 1/4 - 32.
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia