THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Custom Gun
 Login/Join
 
new member
posted
Hello, I am new to the forum. I am a custom turkey call maker and asked a question on our turkey hunting forum regarding a custom built rifle and was refered to this site.
I am interested in having a 7mm rifle made out of wood supplied by me.
And what I need to know is if you all wanted to have a gun made who would be the guy to contact?
If you wouldn't mind sending me a pm I would appreciate it so much.

Sincerely,
John
 
Posts: 4 | Registered: 07 December 2006Reply With Quote
one of us
posted Hide Post
Look down a few posts and you will see one done by Jim Kobe.
 
Posts: 1605 | Location: Wa. State | Registered: 19 November 2001Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
The most important question is, "What's your budget?"
The second most important question is, "What style are you looking to build?"


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5053 | Location: Muletown | Registered: 07 September 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
third question
WHEN do you want it

fourth
your action or provideD?

can range from 1000 to 20000,


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
new member
posted Hide Post
Answer to your questions.

I will only be providing the wood
I want to spend 1500 to 2000 dollars
I would like to have it by Nov. 2007
 
Posts: 4 | Registered: 07 December 2006Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
Sure enough..

contact Jim Kobe, he posts on here, or Mark Skaggs. These guys do pretty darn good work, and can probably make your pricepoint.

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of Bill Soverns
posted Hide Post
I think that price is going to be tough to find.
 
Posts: 1268 | Location: Newell, SD, USA | Registered: 07 December 2001Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
I agree, tough to find for a gun made with a stock from a blank. That will barely cover the stockwork.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
new member
posted Hide Post
I certainly don't want to offend anyone with that price quote. To be honest I really don't know what a good custom gun is worth.
I do know when I make a turkey call I put alot of hours into turning one and finishing it and getting it just right before I sell it for 45 or 50 dollars. And I have had people grimace at that price. But they can always go to Walmart and buy a production call. So I do see your point guys.
So maybe this is a better question.
How much money do I need to save up or how many turkey calls will I have to sell Smiler in order to get a 7mm built out of my blank of wood. That will be super accurate, and some checkering not elaborate, and have a beautiful finish?
 
Posts: 4 | Registered: 07 December 2006Reply With Quote
one of us
Picture of Bill Soverns
posted Hide Post
Sonshine,

If you buy the barreled action....I can do the rest within your budget.
 
Posts: 1268 | Location: Newell, SD, USA | Registered: 07 December 2001Reply With Quote
one of us
posted Hide Post
What kind of action do you want, Mauser98, Winchester m70, R,R,Remington 700, Savage. Eeker

You could Look for a old JC higgins model 50. Then you will have a nice starting point with a FN m98 mauser.
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
One of Us
posted Hide Post
You say 7mm. Do you mean 7 x 57, 280 Rem, 7mm Rem Mag, 7-08, or some other caliber?
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
new member
posted Hide Post
Bill, That is quite a generous offer. I want the 7mm Remington mag action. I will send you a pm.
Thanks for all the responses and help guys.
 
Posts: 4 | Registered: 07 December 2006Reply With Quote
one of us
posted Hide Post
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
One of Us
posted Hide Post
Sonshine

I wonder if you could find a magnum bolt for an Interarms Mark X. I have an Interarms Mark X mauser receiver with a 7mm Rem Mag barrel on it. Nice condition. You'd need to find the bottom metal as well. I could sell it to you for $225 shipped if you are interested. I am sure Mr. Soverns could turn it into a thing of beauty.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
one of us
posted Hide Post
22WRF

I have a new Mark X bolt body with magnum face to go with your action for $75.00 shipped.

James
 
Posts: 658 | Location: W.Va | Registered: 20 August 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia