THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Cosine rule and mag box dimensions
 Login/Join
 
JFE
One of Us
posted
How critical to feed quality is observing the "Cosine rule" for mag box dimensions?

See post no.11 in the attached link for an explanation of the application.

http://www.handloadersbench.com/forum102/22630.html
 
Posts: 514 | Location: Melbourne, Australia | Registered: 19 June 2006Reply With Quote
Rockdoc
One of Us
posted Hide Post
IIRC Duane Wiebe has a post on here somewhere relating to this.


DRSS
 
Posts: 2056 | Location: Australia | Registered: 25 December 2006Reply With Quote
z1r
one of us
Picture of z1r
posted Hide Post
quote:
Originally posted by JFE:
How critical to feed quality is observing the "Cosine rule" for mag box dimensions?

See post no.11 in the attached link for an explanation of the application.

http://www.handloadersbench.com/forum102/22630.html


That just addresses stacking of the cartridges in the magazine. Proper feeding also requires you cut the feed rails with the correct taper. The two are interrelated.




Aut vincere aut mori
 
Posts: 4875 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia