THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Birdseye Maple
 Login/Join
 
one of us
posted
I have a birdseye maple stock in the shop. It is going on a Sako L461 with a stainless steel, sporter weight barrel. Would it look better finished natural in its "blond" state or stained before finishing?

Bill Jacobs


NRA Endowment Member
US Army Veteran
CWP Holder
Gunsmith
 
Posts: 339 | Location: Greenwood, SC | Registered: 06 February 2004Reply With Quote
One of Us
posted Hide Post
Only personal opinion, but unless you really know you stains and have scrap to experiment with, safest to leave blond.

Once tried the "suigi" method and the heat split the stock right down the middle
 
Posts: 3675 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
One of Us
posted Hide Post
what do you like and how long you got. leave it natural and it will naturally darken with age but it does take years. stain it and then as Duane said you may have to test various colors, types of stain and procedures to discover what appeals to you.
 
Posts: 983 | Location: Shenandoah Valley VA | Registered: 05 January 2005Reply With Quote
One of Us
Picture of Use Enough Gun
posted Hide Post
Leave it blond. Big Grin
 
Posts: 18590 | Registered: 04 April 2005Reply With Quote
One of Us
posted Hide Post
I hear blonds have more fun.
Storing it where the sunlight hits it will darken it quicker.
I make a lot of table tops and cabinets out of maple, they take on a lovely shade in time.
 
Posts: 7540 | Registered: 10 April 2009Reply With Quote
One of Us
posted Hide Post
Personally, leave it blond. Fajen made up two Maple water stains...orange and brown. They stained the stock during the sanding process between the 220 and 320 grit stages. The stain sanded off the top of the stock and the stain stayed in the background/fiddleback /birdseye sections to darken. I thought the orange looked not quite right...they liked it.


Dennis Earl Smith
Professional Member ACGG
Benefactor Life NRA
Life NAHC
 
Posts: 311 | Location: Tygh Valley, OR | Registered: 05 November 2010Reply With Quote
One of Us
posted Hide Post
I've used Aqui Fortis on maple stocks. Not really a stain, more of a chemical reaction/conversion, I guess you would call it.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
Picture of WoodHunter
posted Hide Post
Depending on your likes and dislikes (some here hate Maple!!!) a blond finish can be interesting. Below is a Pacific Big Leaf Maple tiger stripe stock with "Guitar" finish. Multiple applications and sanding down to 1200 grit.



Below is a test piece about 2-1/2 inches wide, same wood. With a stain brew of my witchcraft topped with 20 coats of Plikingtons.




So if you have a bunch of test pieces try a lot of combinations.

I you checker, go coarse. 16 or 18 LPI.
 
Posts: 1474 | Location: Running With The Hounds | Registered: 28 April 2011Reply With Quote
one of us
posted Hide Post
I love Maple. Nice looking stock.


Don't Ever Book a Hunt with Jeff Blair
http://forums.accuratereloadin...821061151#2821061151

 
Posts: 7583 | Location: Arizona and off grid in CO | Registered: 28 July 2004Reply With Quote
One of Us
Picture of richj
posted Hide Post
I like this but I have no idea how it was finished.

 
Posts: 6551 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia