Moderator
| take a look at the CZ527..a very neat little rifle available in 7.62x39..Not sure if it is a classic mauser or not though......
|
| Posts: 5684 | Location: North Wales UK | Registered: 22 May 2002 |
IP
|
|
one of us
| I have built two 7.62 X 39 98 Mausers. I had to machine a bushing or spacer and low temp soldered it accross from the extractor to compensate for the smallet diameter case. I spent the most time on it getting it to feed. They are pretty accurate and you get velocities in the 2700 fps range due to the 22 inch barrel versus the 16 inch barrel in the AK 47's. |
| Posts: 1548 | Location: North Texas | Registered: 11 February 2001 |
IP
|
|
one of us
| Craftsman, you beat me to the punch. I was going to say that I knew a man that built two of them, but alas, you got the jump on me. Good luck and good shooting |
| Posts: 849 | Location: Between Doan's Crossing and Red River Station | Registered: 22 July 2001 |
IP
|
|
one of us
| Zastava of Kragujevac ( ex Jugo ) used to build a small Mauser action for .222, .223 and 7.62x39. i handled one : a sleek little rifle! I�m not sure where to get them: Interarms? Good shooting! Hermann ------------------
|
| |
One of Us
| |
| Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001 |
IP
|
|