THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
decal or paint camo?
 Login/Join
 
One of Us
Picture of rick boggs
posted
want to camo my .308 and dont know which way to go i like the decals but do the glues damage the metals or cause rust? thank for any input
 
Posts: 518 | Location: KENTUCKY | Registered: 05 November 2008Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
camo ducttape ... 6 bucks at walmart... wd40 takes it right off

answer to SEVERAL questions


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40016 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of TC1
posted Hide Post
Nothing says class like a can of Krylon


--------------------------------------------

Well, other than that Mrs. Lincoln, how was the play?
 
Posts: 6315 | Location: Mississippi | Registered: 18 May 2002Reply With Quote
one of us
Picture of Tex21
posted Hide Post
quote:
Originally posted by TC1:
Nothing says class like a can of Krylon


WECSOG!


Jason

"Chance favors the prepared mind."
 
Posts: 1449 | Location: Dallas, Texas | Registered: 24 February 2004Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
quote:
Originally posted by TC1:
Nothing says class like a can of Krylon


Krylon fusion.. stuff works great ... but you need 3 cans to do a camo job, and its a bit tougher to get off than camo ducttape!

camo+duct tape... heh, you KNOW that's on the rack of my 4wheeler, dont you?

I found it to be the perfect solution to a hunting buddie's stainless rifle!


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40016 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
Rick,
I got tired of using tape for several reasons there are two types and finding the correct product was difficult. I did not like the vinyl tape. It was shiny and didn't go on properly. The cloth tape was better but hard to find. The other problem I had is I wanted to get the junk off after the season so my good rifle was not ruined. I am looking at putting one of those Camo Enterprise finishes on from Jim Crumley on one of my shotguns. My good Sako rifle is another issue. Curt Boggs
 
Posts: 245 | Location: The Show Me State | Registered: 27 November 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia