THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Rebarrelling a mod 70 PF with a featherweight barrel

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Rebarrelling a mod 70 PF with a featherweight barrel
 Login/Join
 
one of us
Picture of bama7x57
posted
I bought a new PF mod 70 in .270 real cheap at walmart. Can I have this rebarrelled with a used 1980's featherweight barrel in .257 roberts. Both are pushfeeds but wondered if the featherweight action was maybe different from a regular mod 70. Any feeding issues with using the existing magazine.

Bama
 
Posts: 84 | Location: alabama | Registered: 17 January 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
basically, the answer is yes, a gunsmith will need to install and time it..

and on a 270 action, you can set the 257 bullets out LONG


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of bama7x57
posted Hide Post
Sounds good!! I like the thoughts of a LONG 3" Roberts. Will I likely have any feeding problems? Would a newer featherweight classic (easier to find) stock fit this combo?

Bama
 
Posts: 84 | Location: alabama | Registered: 17 January 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
generally the roberts throat is longer than the "short actions" allow the bullets to be seated, so this will be a plus for you. The barrel is quite a bit lighter in contour, so yes, they featherweight stock is the easiest route, though not always cheap.

should feed as well as the 270 does

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40081 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
Picture of duikerman
posted Hide Post
you might want to see about some type of magazine block for the shorter ammo but in the end you'll have a sweet hunting and varmint rifle.
 
Posts: 770 | Location: colorado | Registered: 11 August 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Rebarrelling a mod 70 PF with a featherweight barrel

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia